It seems people are still struggling trying to work with several monitors and HiDPI displays.
A good workaround is described in arch wiki https://wiki.archlinux.org/index.php/HiDPI#Multiple_displays.
So, I have:

• laptop asus ln303ux: 3200x1800,


• external monitor: 1920x1200

Now I use Ubuntu 14.10 & GNOME Shell 3.12.2 that has pretty usable HiDPI support.
So I just use out-of-the-box support of HiDPI - scaling factor is 2 (it can be set up via GUI).
That means that on external monitor I get everything twice bigger than acceptable.
Thus, I use xrandr; but instead of downscaling laptop screen, I upscale external monitor screen:

xrandr --output HDMI1 --scale 2x2 --mode 1920x1200 --fb 3840x4200 --pos 0x0

xrandr --output eDP1 --scale 1x1 --pos 320x2400

So, one by one:

1. 
   --output HDMI1 in my case is the external screen, eDP1 is the laptop screen.


2. 
   --scale 2x2 - make everything on external screen twice smaller


3. 
   --mode XxY - explicitly set the resolution for screen (not necessary if is already set)


4. 
   --fb XxY - set size of a virtual screen (framebuffer) (important without this, you will be able to use only a fourth part of the screen). In my case one screen was on top of another, so I added up effective heights 2400+1800=4200. Also note, that maximum framebuffer size might be specified in xorg.conf - then you cannot exceed it (it is written in the first line of xrandr -q output).


5. 
   --pos XxY - in my case I set absolute positioning of the screens, so my laptop screen is directly on the bottom of the external sceen.

And this is it! Everything is as crisp as it could be.

FYI: to get the names of the screens and available resolutions, one can run xrandr --current.
More information on setting the resolution an be found here: https://wiki.ubuntu.com/X/Config/Resolution .

UPDATE - OPTION 2: one more interesting workaround for applications that support GTK3.
If I normally use only one application on the large screen (e.g. some IDE, like leksah), I do not resize the the screen, but run the application scaled to its original size

env GDK_SCALE=0.5 GDK_DPI_SCALE=0.5 CLUTTER_SCALE=0.5 appname

Why is it blurry?

Your screen always displays 3200x1800 pixels. If you lower the screen resolution on your computer that just means that your screen has to scale the image to fit your screen. Depending on the ratio between your native resolution and the current resolution, that scaling will produce a blurry image.

You can find more information on scaling and native resolution here: https://en.wikipedia.org/wiki/Native_resolution

How can I make the text bigger?

If the text is to small you have two options:

1. Change Ubuntu's font size

How do I change fonts and adjust their size?

2. Change DPI (will make the whole interface bigger, not only text)

How to find and change the screen DPI? (answer by @whtyger)

I used artmem's solution but ran into the mouse problem mentioned by EoghanM. The workaround I found in the old bug report he linked to related to --panning.

I'm shooting for:
- DP1-2 3840x2160 in native DIP.
- eDP1 1366x768, scaled to look reasonable to the right of DP1-2.

I get this to happen by having a frame buffer that is like DP1-2 + (2x eDP1) then I scale everything going to eDP1 by 1/2.

This should be simple but xrandr is a bit tricky.

Here --scale is used to reduce everything going to eDP1 by 1/2. --panning is the same as eDP1 in the original frame buffer with the position (+3840+0) of just to the right of DP1-2. +0+2160 would be below it.

xrandr -d :0 --fb 6572x3696 --output DP1-2 --mode 3840x2160 --scale 1x1 --rate 60 --pos 0x0 --primary



# sometimes panning get applied incorrectly when switching from some other mode, running it twice is a work around

xrandr -d :0 --output eDP1 --off

xrandr -d :0 --fb 6572x3696 --output eDP1  --mode 1366x768  --scale 2x2 --panning 2732x1536+3840+0

xrandr -d :0 --fb 6572x3696 --output eDP1  --mode 1366x768  --scale 2x2 --panning 2732x1536+3840+0

I also set Xft.dpi to 185

$ cat ~/.Xresources

Xft.dpi: 185

When I unplug from the external monitor I run :

xrandr -d :0 --output DP1-2 --off

xrandr -d :0 --fb 2732x1536 --output eDP1  --mode 1366x768  --scale 2x2 --panning 2732x1536+0+0 --pos 0x0 --primary

That doesn't look great but I'm not away from my desk much. You could get around this by changing Xft.dpi and restarting all your desktop programs. I don't know of a way to change Xft.dpi and then get clients to use it without restarting them.

I was able to solve this (with issues) using the details outlined in the following github discussion: https://github.com/linuxmint/Cinnamon/issues/3606

External Monitor QHD (2560X1440), Internal/Laptop Monitor 3200x1800

xrandr --output eDP-1 --scale 1x1 --pos 0x2880

xrandr --output DP-1 --mode 2560x1440 --scale 2x2 --fb 5120x4680

OR

External Monitor FHD (1920x1080), Internal/Laptop Monitor 3200x1800

xrandr --output eDP-1 --scale 1x1 --pos 0x2160

xrandr --output DP-1 --mode 1920x1080 --scale 2x2 --fb 3840x3960

These work, but there is a significant amount to tearing in the high resolution monitor (laptop) when I move windows, resize screens or scroll on a browser. This feels like a software rending solution (which has all these issues of tearing, and slow refreshes).

Its 2017, Linux/Gnome needs to address the multi-monitor, mixed scaling solution. Both Windows 10 and OS X have this resolved without having to resort to command line band-aid fixes that partially work (the tearing issue isn't acceptable for gaming)

These answers are all great, and helped me previously, but a recent

sudo apt-get upgrade 

deleted my randr-config! In attempting to restore my settings I found I could no longer get the mouse beyond the top 1/4th quadrant of the second screen, no matter the --fb input. From https://wiki.archlinux.org/index.php/HiDPI#Side_display I eventually discovered that adding panning did the trick. Also, use of '--right-of' or '--left-of' is simpler than '--pos'.

"Generically if your HiDPI monitor (laptop) is AxB pixels and your regular monitor (external) is CxD and you are scaling by [ExF], the commandline for right-of is:"

xrandr --output eDP-1 --auto --output HDMI-1 --auto --panning [C*E]x[D*F]+[A]+0 --scale [E]x[F] --right-of eDP-1

I have an outdated 1024x768 monitor, connected to a (less outdated) notebook.

The windows rendered in quite different sizes, much bigger in the external monitor (which has an older, bigger dot pitch).

I found a command to scale the monitor:

xrandr --output VGA-1 --scale 1.5x1.5

VGA-1 is the internal name of the monitor, found by running the following command:

xrandr --current | grep connected

The effect is that now the old monitor displays its contents at almost the same size as the notebook.

Curiously enough, it works scaling x1.5 but not 1.45, the display (in my case) turns black.

When I ran the scale comment the first time the result was frightening because the contents of both screens overlapped. For example the cursor pointer appeared twice.

I ran a program:

arandr &

to set the relative screen positions to fix it.

It works like the Settings > Devices > Displays setting.

I installed it with:

sudo apt-get install arandr

Thanks @LuisAlvarado and others for sharing your knowledge!

Fist run $xrandr to display all outputs

Screen 0: minimum 320 x 200, current 7680 x 2160, maximum 8192 x 8192

eDP-1 connected primary 3840x2160+0+0 (normal left inverted right x axis y axis) 344mm x 194mm
3840x2160 60.00*+ 59.98 59.97

3200x1800 59.96 59.94

2880x1620 59.96 59.97

DP-1 disconnected (normal left inverted right x axis y axis)
DP-2 disconnected (normal left inverted right x axis y axis)
DP-3 connected 3840x2160+3840+0 (normal left inverted right x axis y axis) 521mm x 294mm
1920x1080 60.00*+ 50.00 59.94

1920x1080i 60.00 50.00 59.94

1680x1050 59.88

1280x1024 75.02 60.02
As you can see in this case the second monitor is connected to DP-3
Then you can resale the display:
$xrandr --output DP-3 --auto --scale 2x2