How to install Ubuntu 18 LTS on a laptop (Legion y530) with UEFI
[Update 2]
I have followed the given instructions in the next three screens:
The result was:
Then, I restarted the computer, enter to windows 10 an do the known steps and I got:
Then, the screen freezes.
Supposition I guess that the uefi or more general my laptop does not start the graphic environment to start the trying or installing ubuntu options (Supposition because I am not versed in bios nor uefi)
[Update 1]
I have tried to install from a dvd and I got the following errors right after choosing to try or install ubuntu:
[Old post]
I want to install Ubuntu with dual boot with Windows 10.
When I finally made my laptop to read my bootable USB flash (Etcher) I got:
I have spent three days and I do not know what else to do.
I have done:
- disable fast boot
- disable Intel fast storage
- disable secure boot
- I have made a partition from windows
- enter to the USB from windows option of restarting
- I get the UEFI black screen to choose what to do and I get the same screen no matter if a choose to try Ubuntu or to install Ubuntu.
Extra info: When I try with Ubuntu 16 it start the graphic environment but when it arrives to choose which partition to install, the list appears empty.
Any help would be appreciate.
dual-boot system-installation uefi bios
asked yesterday
Another.ChemistAnother.Chemist
1511212
|
show 3 more comments
[Update 2]
I have followed the given instructions in the next three screens:
The result was:
Then, I restarted the computer, enter to windows 10 an do the known steps and I got:
Then, the screen freezes.
Supposition I guess that the uefi or more general my laptop does not start the graphic environment to start the trying or installing ubuntu options (Supposition because I am not versed in bios nor uefi)
[Update 1]
I have tried to install from a dvd and I got the following errors right after choosing to try or install ubuntu:
[Old post]
I want to install Ubuntu with dual boot with Windows 10.
When I finally made my laptop to read my bootable USB flash (Etcher) I got:
I have spent three days and I do not know what else to do.
I have done:
- disable fast boot
- disable Intel fast storage
- disable secure boot
- I have made a partition from windows
- enter to the USB from windows option of restarting
- I get the UEFI black screen to choose what to do and I get the same screen no matter if a choose to try Ubuntu or to install Ubuntu.
Extra info: When I try with Ubuntu 16 it start the graphic environment but when it arrives to choose which partition to install, the list appears empty.
Any help would be appreciate.
dual-boot system-installation uefi bios
asked yesterday
Another.ChemistAnother.Chemist
1511212
2
Did you check the integrity of the downloaded Ubuntu ISO before creating the bootable USB?
– pomsky
yesterday
1
yes, checked it and matched
– Another.Chemist
yesterday
2
All i see there are read-errors, either a invalid-download as pomsky suggested & you said okay, or the media used was faulty (or write-failed). Did you check your install media using the inbuilt function? (when the keyboard & person-in-circle type icons appear you hit space bar & should get a menu which includes option you need; the actual ISO you downloaded can change what you see, but that should be enough for you to find option I hope)
– guiverc
yesterday
@guiverc yes, I created a new dvd and yes, check it and passed
– Another.Chemist
yesterday
1
That startup looked OK, so it's probably a graphics problem now. Do you have Nvidia video? If so try adding the nomodeset word where you added the other words at the quiet splash (you may remove the quiet word for more information at boot time).
– ubfan1
13 hours ago
|
show 3 more comments
[Update 2]
I have followed the given instructions in the next three screens:
The result was:
Then, I restarted the computer, enter to windows 10 an do the known steps and I got:
Then, the screen freezes.
Supposition I guess that the uefi or more general my laptop does not start the graphic environment to start the trying or installing ubuntu options (Supposition because I am not versed in bios nor uefi)
[Update 1]
I have tried to install from a dvd and I got the following errors right after choosing to try or install ubuntu:
[Old post]
I want to install Ubuntu with dual boot with Windows 10.
When I finally made my laptop to read my bootable USB flash (Etcher) I got:
I have spent three days and I do not know what else to do.
I have done:
- disable fast boot
- disable Intel fast storage
- disable secure boot
- I have made a partition from windows
- enter to the USB from windows option of restarting
- I get the UEFI black screen to choose what to do and I get the same screen no matter if a choose to try Ubuntu or to install Ubuntu.
Extra info: When I try with Ubuntu 16 it start the graphic environment but when it arrives to choose which partition to install, the list appears empty.
Any help would be appreciate.
dual-boot system-installation uefi bios
asked yesterday
Another.ChemistAnother.Chemist
1511212
[Update 2]
I have followed the given instructions in the next three screens:
The result was:
Then, I restarted the computer, enter to windows 10 an do the known steps and I got:
Then, the screen freezes.
Supposition I guess that the uefi or more general my laptop does not start the graphic environment to start the trying or installing ubuntu options (Supposition because I am not versed in bios nor uefi)
[Update 1]
I have tried to install from a dvd and I got the following errors right after choosing to try or install ubuntu:
[Old post]
I want to install Ubuntu with dual boot with Windows 10.
When I finally made my laptop to read my bootable USB flash (Etcher) I got:
I have spent three days and I do not know what else to do.
I have done:
- disable fast boot
- disable Intel fast storage
- disable secure boot
- I have made a partition from windows
- enter to the USB from windows option of restarting
- I get the UEFI black screen to choose what to do and I get the same screen no matter if a choose to try Ubuntu or to install Ubuntu.
Extra info: When I try with Ubuntu 16 it start the graphic environment but when it arrives to choose which partition to install, the list appears empty.
Any help would be appreciate.
dual-boot system-installation uefi bios
dual-boot system-installation uefi bios
asked yesterday
Another.ChemistAnother.Chemist
1511212
asked yesterday
Another.ChemistAnother.Chemist
1511212
edited 11 mins ago
Another.Chemist
asked yesterday
Another.ChemistAnother.Chemist
1511212
asked yesterday
Another.ChemistAnother.Chemist
1511212
asked yesterday
Another.ChemistAnother.Chemist
1511212
1511212
2
Did you check the integrity of the downloaded Ubuntu ISO before creating the bootable USB?
– pomsky
yesterday
1
yes, checked it and matched
– Another.Chemist
yesterday
2
All i see there are read-errors, either a invalid-download as pomsky suggested & you said okay, or the media used was faulty (or write-failed). Did you check your install media using the inbuilt function? (when the keyboard & person-in-circle type icons appear you hit space bar & should get a menu which includes option you need; the actual ISO you downloaded can change what you see, but that should be enough for you to find option I hope)
– guiverc
yesterday
@guiverc yes, I created a new dvd and yes, check it and passed
– Another.Chemist
yesterday
1
That startup looked OK, so it's probably a graphics problem now. Do you have Nvidia video? If so try adding the nomodeset word where you added the other words at the quiet splash (you may remove the quiet word for more information at boot time).
– ubfan1
13 hours ago
|
show 3 more comments
2
Did you check the integrity of the downloaded Ubuntu ISO before creating the bootable USB?
– pomsky
yesterday
1
yes, checked it and matched
– Another.Chemist
yesterday
2
All i see there are read-errors, either a invalid-download as pomsky suggested & you said okay, or the media used was faulty (or write-failed). Did you check your install media using the inbuilt function? (when the keyboard & person-in-circle type icons appear you hit space bar & should get a menu which includes option you need; the actual ISO you downloaded can change what you see, but that should be enough for you to find option I hope)
– guiverc
yesterday
@guiverc yes, I created a new dvd and yes, check it and passed
– Another.Chemist
yesterday
1
That startup looked OK, so it's probably a graphics problem now. Do you have Nvidia video? If so try adding the nomodeset word where you added the other words at the quiet splash (you may remove the quiet word for more information at boot time).
– ubfan1
13 hours ago
2
2
Did you check the integrity of the downloaded Ubuntu ISO before creating the bootable USB?
– pomsky
yesterday
Did you check the integrity of the downloaded Ubuntu ISO before creating the bootable USB?
– pomsky
yesterday
1
1
yes, checked it and matched
– Another.Chemist
yesterday
yes, checked it and matched
– Another.Chemist
yesterday
2
2
All i see there are read-errors, either a invalid-download as pomsky suggested & you said okay, or the media used was faulty (or write-failed). Did you check your install media using the inbuilt function? (when the keyboard & person-in-circle type icons appear you hit space bar & should get a menu which includes option you need; the actual ISO you downloaded can change what you see, but that should be enough for you to find option I hope)
– guiverc
yesterday
All i see there are read-errors, either a invalid-download as pomsky suggested & you said okay, or the media used was faulty (or write-failed). Did you check your install media using the inbuilt function? (when the keyboard & person-in-circle type icons appear you hit space bar & should get a menu which includes option you need; the actual ISO you downloaded can change what you see, but that should be enough for you to find option I hope)
– guiverc
yesterday
@guiverc yes, I created a new dvd and yes, check it and passed
– Another.Chemist
yesterday
@guiverc yes, I created a new dvd and yes, check it and passed
– Another.Chemist
yesterday
1
1
That startup looked OK, so it's probably a graphics problem now. Do you have Nvidia video? If so try adding the nomodeset word where you added the other words at the quiet splash (you may remove the quiet word for more information at boot time).
– ubfan1
13 hours ago
That startup looked OK, so it's probably a graphics problem now. Do you have Nvidia video? If so try adding the nomodeset word where you added the other words at the quiet splash (you may remove the quiet word for more information at boot time).
– ubfan1
13 hours ago
|
show 3 more comments
1 Answer
1
active
oldest
votes
With the sort of errors you initially saw, the first thing to check is the ISO with a hashcheck, and then the media selecting the media check grub menu option. A memory check is the third thing to check. Since you did this, the media is OK, but if interrupts are not handled correctly, the program can get scrambled, resulting in all sorts of random errors. The noapic and nolapic options added to the line starting with "linux" in the grub menu item being booted change the way interrupts are handled, and apparently, allowed the program to complete.
The next problem is a video issue likely caused by proprietary video hardware. Until the proprietary video drivers are installed, adding the word "nomodeset" on the grub linux line allows the video to run, probably at a reduced resolution. If you immediately install the proprietary video drivers (e.g. for Nvidia, run the Software and Updates program, select the Additional Drivers tab, and select the current (tested) driver). If you don't want to do that, you can add the nomodeset word to the grub configuration by editing the /etc/default/grub and adding nomodeset to the line
GRUB_CMDLINE_LINUX_DEFAULT="nomodeset quiet splash"
answered 8 hours ago
ubfan1ubfan1
9,36641527
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "89"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1110776%2fhow-to-install-ubuntu-18-lts-on-a-laptop-legion-y530-with-uefi%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
With the sort of errors you initially saw, the first thing to check is the ISO with a hashcheck, and then the media selecting the media check grub menu option. A memory check is the third thing to check. Since you did this, the media is OK, but if interrupts are not handled correctly, the program can get scrambled, resulting in all sorts of random errors. The noapic and nolapic options added to the line starting with "linux" in the grub menu item being booted change the way interrupts are handled, and apparently, allowed the program to complete.
The next problem is a video issue likely caused by proprietary video hardware. Until the proprietary video drivers are installed, adding the word "nomodeset" on the grub linux line allows the video to run, probably at a reduced resolution. If you immediately install the proprietary video drivers (e.g. for Nvidia, run the Software and Updates program, select the Additional Drivers tab, and select the current (tested) driver). If you don't want to do that, you can add the nomodeset word to the grub configuration by editing the /etc/default/grub and adding nomodeset to the line
GRUB_CMDLINE_LINUX_DEFAULT="nomodeset quiet splash"
answered 8 hours ago
ubfan1ubfan1
9,36641527
add a comment |
With the sort of errors you initially saw, the first thing to check is the ISO with a hashcheck, and then the media selecting the media check grub menu option. A memory check is the third thing to check. Since you did this, the media is OK, but if interrupts are not handled correctly, the program can get scrambled, resulting in all sorts of random errors. The noapic and nolapic options added to the line starting with "linux" in the grub menu item being booted change the way interrupts are handled, and apparently, allowed the program to complete.
The next problem is a video issue likely caused by proprietary video hardware. Until the proprietary video drivers are installed, adding the word "nomodeset" on the grub linux line allows the video to run, probably at a reduced resolution. If you immediately install the proprietary video drivers (e.g. for Nvidia, run the Software and Updates program, select the Additional Drivers tab, and select the current (tested) driver). If you don't want to do that, you can add the nomodeset word to the grub configuration by editing the /etc/default/grub and adding nomodeset to the line
GRUB_CMDLINE_LINUX_DEFAULT="nomodeset quiet splash"
answered 8 hours ago
ubfan1ubfan1
9,36641527
add a comment |
With the sort of errors you initially saw, the first thing to check is the ISO with a hashcheck, and then the media selecting the media check grub menu option. A memory check is the third thing to check. Since you did this, the media is OK, but if interrupts are not handled correctly, the program can get scrambled, resulting in all sorts of random errors. The noapic and nolapic options added to the line starting with "linux" in the grub menu item being booted change the way interrupts are handled, and apparently, allowed the program to complete.
The next problem is a video issue likely caused by proprietary video hardware. Until the proprietary video drivers are installed, adding the word "nomodeset" on the grub linux line allows the video to run, probably at a reduced resolution. If you immediately install the proprietary video drivers (e.g. for Nvidia, run the Software and Updates program, select the Additional Drivers tab, and select the current (tested) driver). If you don't want to do that, you can add the nomodeset word to the grub configuration by editing the /etc/default/grub and adding nomodeset to the line
GRUB_CMDLINE_LINUX_DEFAULT="nomodeset quiet splash"
answered 8 hours ago
ubfan1ubfan1
9,36641527
With the sort of errors you initially saw, the first thing to check is the ISO with a hashcheck, and then the media selecting the media check grub menu option. A memory check is the third thing to check. Since you did this, the media is OK, but if interrupts are not handled correctly, the program can get scrambled, resulting in all sorts of random errors. The noapic and nolapic options added to the line starting with "linux" in the grub menu item being booted change the way interrupts are handled, and apparently, allowed the program to complete.
The next problem is a video issue likely caused by proprietary video hardware. Until the proprietary video drivers are installed, adding the word "nomodeset" on the grub linux line allows the video to run, probably at a reduced resolution. If you immediately install the proprietary video drivers (e.g. for Nvidia, run the Software and Updates program, select the Additional Drivers tab, and select the current (tested) driver). If you don't want to do that, you can add the nomodeset word to the grub configuration by editing the /etc/default/grub and adding nomodeset to the line
GRUB_CMDLINE_LINUX_DEFAULT="nomodeset quiet splash"
answered 8 hours ago
ubfan1ubfan1
9,36641527
answered 8 hours ago
ubfan1ubfan1
9,36641527
answered 8 hours ago
ubfan1ubfan1
9,36641527
answered 8 hours ago
ubfan1ubfan1
9,36641527
9,36641527
add a comment |
add a comment |
Thanks for contributing an answer to Ask Ubuntu!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1110776%2fhow-to-install-ubuntu-18-lts-on-a-laptop-legion-y530-with-uefi%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
2
Did you check the integrity of the downloaded Ubuntu ISO before creating the bootable USB?
– pomsky
yesterday
1
yes, checked it and matched
– Another.Chemist
yesterday
2
All i see there are read-errors, either a invalid-download as pomsky suggested & you said okay, or the media used was faulty (or write-failed). Did you check your install media using the inbuilt function? (when the keyboard & person-in-circle type icons appear you hit space bar & should get a menu which includes option you need; the actual ISO you downloaded can change what you see, but that should be enough for you to find option I hope)
– guiverc
yesterday
@guiverc yes, I created a new dvd and yes, check it and passed
– Another.Chemist
yesterday
1
That startup looked OK, so it's probably a graphics problem now. Do you have Nvidia video? If so try adding the nomodeset word where you added the other words at the quiet splash (you may remove the quiet word for more information at boot time).
– ubfan1
13 hours ago