Booting from the GNU GRUB menu
.everyoneloves__top-leaderboard:empty,.everyoneloves__mid-leaderboard:empty,.everyoneloves__bot-mid-leaderboard:empty{ margin-bottom:0;
}
I have a Dell T5810 running Ubuntu 16.04 LTS. On Friday 9th Feb a software update failed and ended in the GNU GRUB menu.
If I select boot it tells me I need to load the kernel first. If I select exit, it tells me there are no bootable devices.
I have done a full hardware test and it has passed.
Is is possible to boot from this situation without losing the contents of the disc? If so how?
Yours,
William McGinty
boot grub2
bumped to the homepage by Community♦ yesterday
This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
add a comment |
I have a Dell T5810 running Ubuntu 16.04 LTS. On Friday 9th Feb a software update failed and ended in the GNU GRUB menu.
If I select boot it tells me I need to load the kernel first. If I select exit, it tells me there are no bootable devices.
I have done a full hardware test and it has passed.
Is is possible to boot from this situation without losing the contents of the disc? If so how?
Yours,
William McGinty
boot grub2
bumped to the homepage by Community♦ yesterday
This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
Thanks for looking at this Karel. The GRUB menu is really basic, about fifty different commands, most of which I don't understand. "Advanced options for Ubuntu" isn't one of them.
– W.McGinty
Feb 10 '18 at 16:36
OK: The GRUB command 'ls' results in "(hd1) error: failure reading sector 0xfc from 'hd1'".
– W.McGinty
Feb 10 '18 at 20:55
add a comment |
I have a Dell T5810 running Ubuntu 16.04 LTS. On Friday 9th Feb a software update failed and ended in the GNU GRUB menu.
If I select boot it tells me I need to load the kernel first. If I select exit, it tells me there are no bootable devices.
I have done a full hardware test and it has passed.
Is is possible to boot from this situation without losing the contents of the disc? If so how?
Yours,
William McGinty
boot grub2
I have a Dell T5810 running Ubuntu 16.04 LTS. On Friday 9th Feb a software update failed and ended in the GNU GRUB menu.
If I select boot it tells me I need to load the kernel first. If I select exit, it tells me there are no bootable devices.
I have done a full hardware test and it has passed.
Is is possible to boot from this situation without losing the contents of the disc? If so how?
Yours,
William McGinty
boot grub2
boot grub2
asked Feb 10 '18 at 12:05
W.McGintyW.McGinty
112
112
bumped to the homepage by Community♦ yesterday
This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
bumped to the homepage by Community♦ yesterday
This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
Thanks for looking at this Karel. The GRUB menu is really basic, about fifty different commands, most of which I don't understand. "Advanced options for Ubuntu" isn't one of them.
– W.McGinty
Feb 10 '18 at 16:36
OK: The GRUB command 'ls' results in "(hd1) error: failure reading sector 0xfc from 'hd1'".
– W.McGinty
Feb 10 '18 at 20:55
add a comment |
Thanks for looking at this Karel. The GRUB menu is really basic, about fifty different commands, most of which I don't understand. "Advanced options for Ubuntu" isn't one of them.
– W.McGinty
Feb 10 '18 at 16:36
OK: The GRUB command 'ls' results in "(hd1) error: failure reading sector 0xfc from 'hd1'".
– W.McGinty
Feb 10 '18 at 20:55
Thanks for looking at this Karel. The GRUB menu is really basic, about fifty different commands, most of which I don't understand. "Advanced options for Ubuntu" isn't one of them.
– W.McGinty
Feb 10 '18 at 16:36
Thanks for looking at this Karel. The GRUB menu is really basic, about fifty different commands, most of which I don't understand. "Advanced options for Ubuntu" isn't one of them.
– W.McGinty
Feb 10 '18 at 16:36
OK: The GRUB command 'ls' results in "(hd1) error: failure reading sector 0xfc from 'hd1'".
– W.McGinty
Feb 10 '18 at 20:55
OK: The GRUB command 'ls' results in "(hd1) error: failure reading sector 0xfc from 'hd1'".
– W.McGinty
Feb 10 '18 at 20:55
add a comment |
1 Answer
1
active
oldest
votes
Reboot or cold start the computer.
Immediately after the BIOS/UEFI splash screen during boot, with BIOS, quickly press and hold the Shift key, which will bring up the GNU GRUB menu. (If you see the Ubuntu logo, you've missed the point where you can enter the GRUB menu.) With UEFI press (perhaps several times) the Esc key to get to the GRUB menu. Sometimes the manufacturer's splash screen is a part of the Windows bootloader, so when you power up the machine it goes straight to the GRUB screen, and then pressing Shift is unnecessary.
From the purple GRUB screen select Advanced options for Ubuntu with the ↑ and ↓ keys and press Enter.
A new purple screen will appear showing a list of kernels. Select an older kernel version instead of the latest kernel version and press Enter.
Ubuntu will load the selected kernel and proceed to the login screen as usual.
After rebooting
Find the latest installed kernel version in the results of the following command:
dpkg -l | grep "linux-[a-z]*-"
Uninstall the latest kernel.
sudo apt purge <latest-kernel-version-number>
Replace
<latest-kernel-version-number>
in the above command with the latest kernel version number.
Update grub.
sudo update-grub
Reboot.
sudo reboot
Don't let Ubuntu update the kernel to the kernel version that caused the GRUB menu boot problem again, or else you'll get the same problem that you got before. Instead wait for the next kernel update and update to that kernel version.
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "89"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1004836%2fbooting-from-the-gnu-grub-menu%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
Reboot or cold start the computer.
Immediately after the BIOS/UEFI splash screen during boot, with BIOS, quickly press and hold the Shift key, which will bring up the GNU GRUB menu. (If you see the Ubuntu logo, you've missed the point where you can enter the GRUB menu.) With UEFI press (perhaps several times) the Esc key to get to the GRUB menu. Sometimes the manufacturer's splash screen is a part of the Windows bootloader, so when you power up the machine it goes straight to the GRUB screen, and then pressing Shift is unnecessary.
From the purple GRUB screen select Advanced options for Ubuntu with the ↑ and ↓ keys and press Enter.
A new purple screen will appear showing a list of kernels. Select an older kernel version instead of the latest kernel version and press Enter.
Ubuntu will load the selected kernel and proceed to the login screen as usual.
After rebooting
Find the latest installed kernel version in the results of the following command:
dpkg -l | grep "linux-[a-z]*-"
Uninstall the latest kernel.
sudo apt purge <latest-kernel-version-number>
Replace
<latest-kernel-version-number>
in the above command with the latest kernel version number.
Update grub.
sudo update-grub
Reboot.
sudo reboot
Don't let Ubuntu update the kernel to the kernel version that caused the GRUB menu boot problem again, or else you'll get the same problem that you got before. Instead wait for the next kernel update and update to that kernel version.
add a comment |
Reboot or cold start the computer.
Immediately after the BIOS/UEFI splash screen during boot, with BIOS, quickly press and hold the Shift key, which will bring up the GNU GRUB menu. (If you see the Ubuntu logo, you've missed the point where you can enter the GRUB menu.) With UEFI press (perhaps several times) the Esc key to get to the GRUB menu. Sometimes the manufacturer's splash screen is a part of the Windows bootloader, so when you power up the machine it goes straight to the GRUB screen, and then pressing Shift is unnecessary.
From the purple GRUB screen select Advanced options for Ubuntu with the ↑ and ↓ keys and press Enter.
A new purple screen will appear showing a list of kernels. Select an older kernel version instead of the latest kernel version and press Enter.
Ubuntu will load the selected kernel and proceed to the login screen as usual.
After rebooting
Find the latest installed kernel version in the results of the following command:
dpkg -l | grep "linux-[a-z]*-"
Uninstall the latest kernel.
sudo apt purge <latest-kernel-version-number>
Replace
<latest-kernel-version-number>
in the above command with the latest kernel version number.
Update grub.
sudo update-grub
Reboot.
sudo reboot
Don't let Ubuntu update the kernel to the kernel version that caused the GRUB menu boot problem again, or else you'll get the same problem that you got before. Instead wait for the next kernel update and update to that kernel version.
add a comment |
Reboot or cold start the computer.
Immediately after the BIOS/UEFI splash screen during boot, with BIOS, quickly press and hold the Shift key, which will bring up the GNU GRUB menu. (If you see the Ubuntu logo, you've missed the point where you can enter the GRUB menu.) With UEFI press (perhaps several times) the Esc key to get to the GRUB menu. Sometimes the manufacturer's splash screen is a part of the Windows bootloader, so when you power up the machine it goes straight to the GRUB screen, and then pressing Shift is unnecessary.
From the purple GRUB screen select Advanced options for Ubuntu with the ↑ and ↓ keys and press Enter.
A new purple screen will appear showing a list of kernels. Select an older kernel version instead of the latest kernel version and press Enter.
Ubuntu will load the selected kernel and proceed to the login screen as usual.
After rebooting
Find the latest installed kernel version in the results of the following command:
dpkg -l | grep "linux-[a-z]*-"
Uninstall the latest kernel.
sudo apt purge <latest-kernel-version-number>
Replace
<latest-kernel-version-number>
in the above command with the latest kernel version number.
Update grub.
sudo update-grub
Reboot.
sudo reboot
Don't let Ubuntu update the kernel to the kernel version that caused the GRUB menu boot problem again, or else you'll get the same problem that you got before. Instead wait for the next kernel update and update to that kernel version.
Reboot or cold start the computer.
Immediately after the BIOS/UEFI splash screen during boot, with BIOS, quickly press and hold the Shift key, which will bring up the GNU GRUB menu. (If you see the Ubuntu logo, you've missed the point where you can enter the GRUB menu.) With UEFI press (perhaps several times) the Esc key to get to the GRUB menu. Sometimes the manufacturer's splash screen is a part of the Windows bootloader, so when you power up the machine it goes straight to the GRUB screen, and then pressing Shift is unnecessary.
From the purple GRUB screen select Advanced options for Ubuntu with the ↑ and ↓ keys and press Enter.
A new purple screen will appear showing a list of kernels. Select an older kernel version instead of the latest kernel version and press Enter.
Ubuntu will load the selected kernel and proceed to the login screen as usual.
After rebooting
Find the latest installed kernel version in the results of the following command:
dpkg -l | grep "linux-[a-z]*-"
Uninstall the latest kernel.
sudo apt purge <latest-kernel-version-number>
Replace
<latest-kernel-version-number>
in the above command with the latest kernel version number.
Update grub.
sudo update-grub
Reboot.
sudo reboot
Don't let Ubuntu update the kernel to the kernel version that caused the GRUB menu boot problem again, or else you'll get the same problem that you got before. Instead wait for the next kernel update and update to that kernel version.
edited Nov 12 '18 at 7:09
answered Feb 10 '18 at 12:08
karelkarel
61k13132155
61k13132155
add a comment |
add a comment |
Thanks for contributing an answer to Ask Ubuntu!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1004836%2fbooting-from-the-gnu-grub-menu%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Thanks for looking at this Karel. The GRUB menu is really basic, about fifty different commands, most of which I don't understand. "Advanced options for Ubuntu" isn't one of them.
– W.McGinty
Feb 10 '18 at 16:36
OK: The GRUB command 'ls' results in "(hd1) error: failure reading sector 0xfc from 'hd1'".
– W.McGinty
Feb 10 '18 at 20:55