Run Application using Command without blocking Terminal
I have made some command (at /usr/bin) to Run Application like Matlab, Weka etc in Ubuntu 18.04 LTS. While using Matlab command, it holds the Terminal until I close Matlab or Terminal (if I close Terminal, Matlab also closed). How can I avoid this problem, that means Matlab command will not hold terminal while working? Thank You.
The Following Format has worked before but suddenly not working.
#!/bin/bash
setsid /usr/local/MATLAB/R2018a/bin/matlab </dev/null >/dev/null 2>&1 & disown
Now Matlab just open the logo but no further work going on....
matlab
asked 3 hours ago
Shaikat SahaShaikat Saha
82
New contributor
Shaikat Saha is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
I have made some command (at /usr/bin) to Run Application like Matlab, Weka etc in Ubuntu 18.04 LTS. While using Matlab command, it holds the Terminal until I close Matlab or Terminal (if I close Terminal, Matlab also closed). How can I avoid this problem, that means Matlab command will not hold terminal while working? Thank You.
The Following Format has worked before but suddenly not working.
#!/bin/bash
setsid /usr/local/MATLAB/R2018a/bin/matlab </dev/null >/dev/null 2>&1 & disown
Now Matlab just open the logo but no further work going on....
matlab
asked 3 hours ago
Shaikat SahaShaikat Saha
82
New contributor
Shaikat Saha is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
Has there been any recent update for Matlab that you recall ?
– Sergiy Kolodyazhnyy
1 hour ago
add a comment |
I have made some command (at /usr/bin) to Run Application like Matlab, Weka etc in Ubuntu 18.04 LTS. While using Matlab command, it holds the Terminal until I close Matlab or Terminal (if I close Terminal, Matlab also closed). How can I avoid this problem, that means Matlab command will not hold terminal while working? Thank You.
The Following Format has worked before but suddenly not working.
#!/bin/bash
setsid /usr/local/MATLAB/R2018a/bin/matlab </dev/null >/dev/null 2>&1 & disown
Now Matlab just open the logo but no further work going on....
matlab
asked 3 hours ago
Shaikat SahaShaikat Saha
82
New contributor
Shaikat Saha is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
I have made some command (at /usr/bin) to Run Application like Matlab, Weka etc in Ubuntu 18.04 LTS. While using Matlab command, it holds the Terminal until I close Matlab or Terminal (if I close Terminal, Matlab also closed). How can I avoid this problem, that means Matlab command will not hold terminal while working? Thank You.
The Following Format has worked before but suddenly not working.
#!/bin/bash
setsid /usr/local/MATLAB/R2018a/bin/matlab </dev/null >/dev/null 2>&1 & disown
Now Matlab just open the logo but no further work going on....
matlab
matlab
asked 3 hours ago
Shaikat SahaShaikat Saha
82
New contributor
Shaikat Saha is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 3 hours ago
Shaikat SahaShaikat Saha
82
New contributor
Shaikat Saha is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 3 hours ago
Shaikat SahaShaikat Saha
82
New contributor
Shaikat Saha is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 3 hours ago
Shaikat SahaShaikat Saha
82
asked 3 hours ago
Shaikat SahaShaikat Saha
82
82
New contributor
Shaikat Saha is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
New contributor
Shaikat Saha is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
Shaikat Saha is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
Has there been any recent update for Matlab that you recall ?
– Sergiy Kolodyazhnyy
1 hour ago
add a comment |
Has there been any recent update for Matlab that you recall ?
– Sergiy Kolodyazhnyy
1 hour ago
Has there been any recent update for Matlab that you recall ?
– Sergiy Kolodyazhnyy
1 hour ago
Has there been any recent update for Matlab that you recall ?
– Sergiy Kolodyazhnyy
1 hour ago
add a comment |
1 Answer
1
active
oldest
votes
In this case nohup [CMD] & is a good alternative. nohup frees the command from the terminal running it and makes it immune to terminal hangups.
Also, the command you posted opens a new session and immediately sends EOF with </dev/null which forces matlab to not accept any input from terminal. This might be an issue depending on how a given program executes upon opening. I also do not think disown serves any purpose here, as the & runs it in the background and setsid should free it from the terminal. disown does not disconnect the program from the terminal, it only removes it from the job list. In any case, I'd use nohup [CMD] & as it does
1) separate the program from the terminal running it
2) closes standard input
3) redirects stdout and stderr to a separate file for examination instead of just sending it into the /dev/null abyss
4) & at the end puts it in the background
answered 1 hour ago
BarBar1234BarBar1234
212
New contributor
BarBar1234 is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "89"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Shaikat Saha is a new contributor. Be nice, and check out our Code of Conduct.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1119687%2frun-application-using-command-without-blocking-terminal%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
In this case nohup [CMD] & is a good alternative. nohup frees the command from the terminal running it and makes it immune to terminal hangups.
Also, the command you posted opens a new session and immediately sends EOF with </dev/null which forces matlab to not accept any input from terminal. This might be an issue depending on how a given program executes upon opening. I also do not think disown serves any purpose here, as the & runs it in the background and setsid should free it from the terminal. disown does not disconnect the program from the terminal, it only removes it from the job list. In any case, I'd use nohup [CMD] & as it does
1) separate the program from the terminal running it
2) closes standard input
3) redirects stdout and stderr to a separate file for examination instead of just sending it into the /dev/null abyss
4) & at the end puts it in the background
answered 1 hour ago
BarBar1234BarBar1234
212
New contributor
BarBar1234 is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
In this case nohup [CMD] & is a good alternative. nohup frees the command from the terminal running it and makes it immune to terminal hangups.
Also, the command you posted opens a new session and immediately sends EOF with </dev/null which forces matlab to not accept any input from terminal. This might be an issue depending on how a given program executes upon opening. I also do not think disown serves any purpose here, as the & runs it in the background and setsid should free it from the terminal. disown does not disconnect the program from the terminal, it only removes it from the job list. In any case, I'd use nohup [CMD] & as it does
1) separate the program from the terminal running it
2) closes standard input
3) redirects stdout and stderr to a separate file for examination instead of just sending it into the /dev/null abyss
4) & at the end puts it in the background
answered 1 hour ago
BarBar1234BarBar1234
212
New contributor
BarBar1234 is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
In this case nohup [CMD] & is a good alternative. nohup frees the command from the terminal running it and makes it immune to terminal hangups.
Also, the command you posted opens a new session and immediately sends EOF with </dev/null which forces matlab to not accept any input from terminal. This might be an issue depending on how a given program executes upon opening. I also do not think disown serves any purpose here, as the & runs it in the background and setsid should free it from the terminal. disown does not disconnect the program from the terminal, it only removes it from the job list. In any case, I'd use nohup [CMD] & as it does
1) separate the program from the terminal running it
2) closes standard input
3) redirects stdout and stderr to a separate file for examination instead of just sending it into the /dev/null abyss
4) & at the end puts it in the background
answered 1 hour ago
BarBar1234BarBar1234
212
New contributor
BarBar1234 is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
In this case nohup [CMD] & is a good alternative. nohup frees the command from the terminal running it and makes it immune to terminal hangups.
Also, the command you posted opens a new session and immediately sends EOF with </dev/null which forces matlab to not accept any input from terminal. This might be an issue depending on how a given program executes upon opening. I also do not think disown serves any purpose here, as the & runs it in the background and setsid should free it from the terminal. disown does not disconnect the program from the terminal, it only removes it from the job list. In any case, I'd use nohup [CMD] & as it does
1) separate the program from the terminal running it
2) closes standard input
3) redirects stdout and stderr to a separate file for examination instead of just sending it into the /dev/null abyss
4) & at the end puts it in the background
answered 1 hour ago
BarBar1234BarBar1234
212
New contributor
BarBar1234 is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
edited 1 hour ago
answered 1 hour ago
BarBar1234BarBar1234
212
New contributor
BarBar1234 is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
answered 1 hour ago
BarBar1234BarBar1234
212
answered 1 hour ago
BarBar1234BarBar1234
212
212
New contributor
BarBar1234 is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
New contributor
BarBar1234 is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
BarBar1234 is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
add a comment |
Shaikat Saha is a new contributor. Be nice, and check out our Code of Conduct.
Shaikat Saha is a new contributor. Be nice, and check out our Code of Conduct.
Shaikat Saha is a new contributor. Be nice, and check out our Code of Conduct.
Shaikat Saha is a new contributor. Be nice, and check out our Code of Conduct.
Thanks for contributing an answer to Ask Ubuntu!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1119687%2frun-application-using-command-without-blocking-terminal%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Has there been any recent update for Matlab that you recall ?
– Sergiy Kolodyazhnyy
1 hour ago