Stuck at Ubuntu logo while booting in 18.04












5















My system stuck at ubuntu logo while booting. To resolve it, I've set nomodeset.



But now it occurs a resolution issue to 1024x768.
Here are the necessary information:



lspci -nnk | grep -iA2 vga
00:02.0 VGA compatible controller [0300]: Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2772] (rev 02)
Subsystem: Hewlett-Packard Company 82945G/GZ Integrated Graphics Controller [103c:302a]
Kernel modules: i915, intelfb


and



xrandr 
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 1024 x 768, current 1024 x 768, maximum 1024 x 768
default connected primary 1024x768+0+0 0mm x 0mm
1024x768 76.00*


Output of sudo lshw -c display



*-display UNCLAIMED       
description: VGA compatible controller
product: 82945G/GZ Integrated Graphics Controller
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: msi pm vga_controller bus_master cap_list
configuration: latency=0
resources: memory:e2000000-e207ffff ioport:c000(size=8) memory:d0000000-dfffffff memory:e2080000-e20bffff memory:c0000-dffff


I've tried solution 1 and solution 2 but no success.



This issue occurred only after installing it, not when I choose 'Try without Installing', I don't need to set nomodeset in that case.



Intel Graphics Update Tool shows:



Checking if Intel graphics card available...
• checking for i915 module in /sys/module
• i915 module found
Checking if Intel graphics card available... OK
Retrieving information from 01.org...
• fetching https://download.01.org/gfx/ilg-config.cfg
• saving to /home/garden/.ilg-config
• fetched 1626 bytes
• fetched 9818 bytes
• fetched 12301 bytes
• looking up [Ubuntu bionic] configuration
Retrieving information from 01.org... OK
Checking distribution... Failed


Edit:
I've installed xserver-xorg-video-intelandxorg-dev. I've tried acpi_osi=linux,acpi_backlight=vendor, noalpic, i915.modeset=0 also create xorg.conf file and modify file /etc/initramfs-tools/modules to add i915 and intel_agp drivers as mentioned here.










share|improve this question

























  • I guess it is necessary to use nomodeset. What graphics chip/card is it? I can see that it is Intel graphics, but which model? For some chips, it helps to install the package xserver-xorg-video-intel

    – sudodus
    May 1 '18 at 9:20











  • Sometimes it helps with #GRUB_TERMINAL=console ; Uncomment to disable graphical terminal. This may provide help if the GRUB 2 menu is too large or unreadable. It also may help when using the GRUB_HIDDEN_TIMEOUT feature. See this link

    – sudodus
    May 1 '18 at 9:24













  • @sudodus xserver-xorg-video-intel command not found and grub2 is not too large, it is readable but let me try once.

    – d a i s y
    May 1 '18 at 9:31













  • Install with sudo apt install xserver-xorg-video-intel

    – sudodus
    May 1 '18 at 9:33






  • 1





    @sudodus xserver-xorg-video-intel already installed

    – d a i s y
    May 1 '18 at 9:34
















5















My system stuck at ubuntu logo while booting. To resolve it, I've set nomodeset.



But now it occurs a resolution issue to 1024x768.
Here are the necessary information:



lspci -nnk | grep -iA2 vga
00:02.0 VGA compatible controller [0300]: Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2772] (rev 02)
Subsystem: Hewlett-Packard Company 82945G/GZ Integrated Graphics Controller [103c:302a]
Kernel modules: i915, intelfb


and



xrandr 
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 1024 x 768, current 1024 x 768, maximum 1024 x 768
default connected primary 1024x768+0+0 0mm x 0mm
1024x768 76.00*


Output of sudo lshw -c display



*-display UNCLAIMED       
description: VGA compatible controller
product: 82945G/GZ Integrated Graphics Controller
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: msi pm vga_controller bus_master cap_list
configuration: latency=0
resources: memory:e2000000-e207ffff ioport:c000(size=8) memory:d0000000-dfffffff memory:e2080000-e20bffff memory:c0000-dffff


I've tried solution 1 and solution 2 but no success.



This issue occurred only after installing it, not when I choose 'Try without Installing', I don't need to set nomodeset in that case.



Intel Graphics Update Tool shows:



Checking if Intel graphics card available...
• checking for i915 module in /sys/module
• i915 module found
Checking if Intel graphics card available... OK
Retrieving information from 01.org...
• fetching https://download.01.org/gfx/ilg-config.cfg
• saving to /home/garden/.ilg-config
• fetched 1626 bytes
• fetched 9818 bytes
• fetched 12301 bytes
• looking up [Ubuntu bionic] configuration
Retrieving information from 01.org... OK
Checking distribution... Failed


Edit:
I've installed xserver-xorg-video-intelandxorg-dev. I've tried acpi_osi=linux,acpi_backlight=vendor, noalpic, i915.modeset=0 also create xorg.conf file and modify file /etc/initramfs-tools/modules to add i915 and intel_agp drivers as mentioned here.










share|improve this question

























  • I guess it is necessary to use nomodeset. What graphics chip/card is it? I can see that it is Intel graphics, but which model? For some chips, it helps to install the package xserver-xorg-video-intel

    – sudodus
    May 1 '18 at 9:20











  • Sometimes it helps with #GRUB_TERMINAL=console ; Uncomment to disable graphical terminal. This may provide help if the GRUB 2 menu is too large or unreadable. It also may help when using the GRUB_HIDDEN_TIMEOUT feature. See this link

    – sudodus
    May 1 '18 at 9:24













  • @sudodus xserver-xorg-video-intel command not found and grub2 is not too large, it is readable but let me try once.

    – d a i s y
    May 1 '18 at 9:31













  • Install with sudo apt install xserver-xorg-video-intel

    – sudodus
    May 1 '18 at 9:33






  • 1





    @sudodus xserver-xorg-video-intel already installed

    – d a i s y
    May 1 '18 at 9:34














5












5








5








My system stuck at ubuntu logo while booting. To resolve it, I've set nomodeset.



But now it occurs a resolution issue to 1024x768.
Here are the necessary information:



lspci -nnk | grep -iA2 vga
00:02.0 VGA compatible controller [0300]: Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2772] (rev 02)
Subsystem: Hewlett-Packard Company 82945G/GZ Integrated Graphics Controller [103c:302a]
Kernel modules: i915, intelfb


and



xrandr 
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 1024 x 768, current 1024 x 768, maximum 1024 x 768
default connected primary 1024x768+0+0 0mm x 0mm
1024x768 76.00*


Output of sudo lshw -c display



*-display UNCLAIMED       
description: VGA compatible controller
product: 82945G/GZ Integrated Graphics Controller
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: msi pm vga_controller bus_master cap_list
configuration: latency=0
resources: memory:e2000000-e207ffff ioport:c000(size=8) memory:d0000000-dfffffff memory:e2080000-e20bffff memory:c0000-dffff


I've tried solution 1 and solution 2 but no success.



This issue occurred only after installing it, not when I choose 'Try without Installing', I don't need to set nomodeset in that case.



Intel Graphics Update Tool shows:



Checking if Intel graphics card available...
• checking for i915 module in /sys/module
• i915 module found
Checking if Intel graphics card available... OK
Retrieving information from 01.org...
• fetching https://download.01.org/gfx/ilg-config.cfg
• saving to /home/garden/.ilg-config
• fetched 1626 bytes
• fetched 9818 bytes
• fetched 12301 bytes
• looking up [Ubuntu bionic] configuration
Retrieving information from 01.org... OK
Checking distribution... Failed


Edit:
I've installed xserver-xorg-video-intelandxorg-dev. I've tried acpi_osi=linux,acpi_backlight=vendor, noalpic, i915.modeset=0 also create xorg.conf file and modify file /etc/initramfs-tools/modules to add i915 and intel_agp drivers as mentioned here.










share|improve this question
















My system stuck at ubuntu logo while booting. To resolve it, I've set nomodeset.



But now it occurs a resolution issue to 1024x768.
Here are the necessary information:



lspci -nnk | grep -iA2 vga
00:02.0 VGA compatible controller [0300]: Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2772] (rev 02)
Subsystem: Hewlett-Packard Company 82945G/GZ Integrated Graphics Controller [103c:302a]
Kernel modules: i915, intelfb


and



xrandr 
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 1024 x 768, current 1024 x 768, maximum 1024 x 768
default connected primary 1024x768+0+0 0mm x 0mm
1024x768 76.00*


Output of sudo lshw -c display



*-display UNCLAIMED       
description: VGA compatible controller
product: 82945G/GZ Integrated Graphics Controller
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: msi pm vga_controller bus_master cap_list
configuration: latency=0
resources: memory:e2000000-e207ffff ioport:c000(size=8) memory:d0000000-dfffffff memory:e2080000-e20bffff memory:c0000-dffff


I've tried solution 1 and solution 2 but no success.



This issue occurred only after installing it, not when I choose 'Try without Installing', I don't need to set nomodeset in that case.



Intel Graphics Update Tool shows:



Checking if Intel graphics card available...
• checking for i915 module in /sys/module
• i915 module found
Checking if Intel graphics card available... OK
Retrieving information from 01.org...
• fetching https://download.01.org/gfx/ilg-config.cfg
• saving to /home/garden/.ilg-config
• fetched 1626 bytes
• fetched 9818 bytes
• fetched 12301 bytes
• looking up [Ubuntu bionic] configuration
Retrieving information from 01.org... OK
Checking distribution... Failed


Edit:
I've installed xserver-xorg-video-intelandxorg-dev. I've tried acpi_osi=linux,acpi_backlight=vendor, noalpic, i915.modeset=0 also create xorg.conf file and modify file /etc/initramfs-tools/modules to add i915 and intel_agp drivers as mentioned here.







18.04 intel wayland mutter gdm3






share|improve this question















share|improve this question













share|improve this question




share|improve this question








edited 1 hour ago







d a i s y

















asked May 1 '18 at 9:12









d a i s yd a i s y

3,30582344




3,30582344













  • I guess it is necessary to use nomodeset. What graphics chip/card is it? I can see that it is Intel graphics, but which model? For some chips, it helps to install the package xserver-xorg-video-intel

    – sudodus
    May 1 '18 at 9:20











  • Sometimes it helps with #GRUB_TERMINAL=console ; Uncomment to disable graphical terminal. This may provide help if the GRUB 2 menu is too large or unreadable. It also may help when using the GRUB_HIDDEN_TIMEOUT feature. See this link

    – sudodus
    May 1 '18 at 9:24













  • @sudodus xserver-xorg-video-intel command not found and grub2 is not too large, it is readable but let me try once.

    – d a i s y
    May 1 '18 at 9:31













  • Install with sudo apt install xserver-xorg-video-intel

    – sudodus
    May 1 '18 at 9:33






  • 1





    @sudodus xserver-xorg-video-intel already installed

    – d a i s y
    May 1 '18 at 9:34



















  • I guess it is necessary to use nomodeset. What graphics chip/card is it? I can see that it is Intel graphics, but which model? For some chips, it helps to install the package xserver-xorg-video-intel

    – sudodus
    May 1 '18 at 9:20











  • Sometimes it helps with #GRUB_TERMINAL=console ; Uncomment to disable graphical terminal. This may provide help if the GRUB 2 menu is too large or unreadable. It also may help when using the GRUB_HIDDEN_TIMEOUT feature. See this link

    – sudodus
    May 1 '18 at 9:24













  • @sudodus xserver-xorg-video-intel command not found and grub2 is not too large, it is readable but let me try once.

    – d a i s y
    May 1 '18 at 9:31













  • Install with sudo apt install xserver-xorg-video-intel

    – sudodus
    May 1 '18 at 9:33






  • 1





    @sudodus xserver-xorg-video-intel already installed

    – d a i s y
    May 1 '18 at 9:34

















I guess it is necessary to use nomodeset. What graphics chip/card is it? I can see that it is Intel graphics, but which model? For some chips, it helps to install the package xserver-xorg-video-intel

– sudodus
May 1 '18 at 9:20





I guess it is necessary to use nomodeset. What graphics chip/card is it? I can see that it is Intel graphics, but which model? For some chips, it helps to install the package xserver-xorg-video-intel

– sudodus
May 1 '18 at 9:20













Sometimes it helps with #GRUB_TERMINAL=console ; Uncomment to disable graphical terminal. This may provide help if the GRUB 2 menu is too large or unreadable. It also may help when using the GRUB_HIDDEN_TIMEOUT feature. See this link

– sudodus
May 1 '18 at 9:24







Sometimes it helps with #GRUB_TERMINAL=console ; Uncomment to disable graphical terminal. This may provide help if the GRUB 2 menu is too large or unreadable. It also may help when using the GRUB_HIDDEN_TIMEOUT feature. See this link

– sudodus
May 1 '18 at 9:24















@sudodus xserver-xorg-video-intel command not found and grub2 is not too large, it is readable but let me try once.

– d a i s y
May 1 '18 at 9:31







@sudodus xserver-xorg-video-intel command not found and grub2 is not too large, it is readable but let me try once.

– d a i s y
May 1 '18 at 9:31















Install with sudo apt install xserver-xorg-video-intel

– sudodus
May 1 '18 at 9:33





Install with sudo apt install xserver-xorg-video-intel

– sudodus
May 1 '18 at 9:33




1




1





@sudodus xserver-xorg-video-intel already installed

– d a i s y
May 1 '18 at 9:34





@sudodus xserver-xorg-video-intel already installed

– d a i s y
May 1 '18 at 9:34










3 Answers
3






active

oldest

votes


















2















To resolve the issue, I have disabled Wayland in GDM3.



sudo vi /etc/gdm3/custom.conf


Change #WaylandEnable=false to WaylandEnable=false and reboot the
system.




This can be done in two ways,





  1. Set nomodeset to login,and follow the above steps. (In my case, I've already set nomodeset which was an easy way)

  2. With live dvd or bootable media: make sure the path of your installed drive
    /media/ubuntu/XXX/etc/gdm3/custom.conf which can be found with df -h


UPDATE:



It seems like this bug has been fixed with upgrading mutter package, so if the above solution did not workout, try to upgrade mutter package.






share|improve this answer


























  • If you need to boot with Live-CD/USB to edit that file, remember to edit the file installed on the hard drive, something like: Files - Other Locations - NN GB file system - Ctrl+Alt+T - sudo gedit /media/ubuntu/blah/etc/gdm3/custom.conf

    – Randall Whitman
    Sep 12 '18 at 2:50





















0














I had the same problem. I tried a fresh install of Ubuntu 18.04 on a Dell Latitude D620, it booted fine from USB drive but after restart it just showed the ubuntu logo and the mouse cursor, but the system was not responding to CTRL+F2/F3 or mouse movements.



My hardware:



lspci -nnk | grep -iA2 vga
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03)
Subsystem: Dell Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [1028:01c2]
Kernel driver in use: i915


So adding nomodeset to /etc/default/grub the system was able to boot I was stuck with the wrong resolution of 1024x768 instead of the 1280x800. So it is not a solution I wanted to live with.



Finally I found a good work around:



sudo apt-get install lightdm


Installing lightdm as Display Manager instead of the default gdm3 solved the problem with the Intel 945GM (i915) and the frozen ubuntu logo.



P.S.: WLAN was also not working with the integrated Broadcom BCM4311.



lspci -vnn | grep 14e4 
09:00.0 Ethernet controller [0200]: Broadcom Limited NetXtreme BCM5752 Gigabit Ethernet PCI Express [14e4:1600] (rev 02)
0c:00.0 Network controller [0280]: Broadcom Limited BCM4311 802.11b/g WLAN [14e4:4311] (rev 01)


Solution was installing the firmware-b43-installer (https://askubuntu.com/a/609420/127023).






share|improve this answer































    0














    Update: I switched to Unity after lightdm+Gnome was crashing (*)



    I had the same problem with i915 module. The screen was freezing when booting after the cursor was appearing on the screen. It was solved by replacing gdm by lightdm as described above. Summarizing the recipe:





    1. Boot by adding the nomodeset option:



      a. Hold SHIFT to see GRUB menu before booting

      b. Press e and add nomodeset at the line
      linux /boot,vmlinuz-.... root=UUID=... ro quiet splash nomodeset
      and then press F10 to reboot.



    2. Start with low resolution screen with the above mentioned results.

    3. Install lightdm+unity desktop and choose it as default.

      sudo apt-get install lightdm;
      sudo apt-get install ubuntu-unity-desktop

    4. Reboot.


    (*) i915 module error messages from dmesg, the session was forcingly logging out






    share|improve this answer

























      Your Answer








      StackExchange.ready(function() {
      var channelOptions = {
      tags: "".split(" "),
      id: "89"
      };
      initTagRenderer("".split(" "), "".split(" "), channelOptions);

      StackExchange.using("externalEditor", function() {
      // Have to fire editor after snippets, if snippets enabled
      if (StackExchange.settings.snippets.snippetsEnabled) {
      StackExchange.using("snippets", function() {
      createEditor();
      });
      }
      else {
      createEditor();
      }
      });

      function createEditor() {
      StackExchange.prepareEditor({
      heartbeatType: 'answer',
      autoActivateHeartbeat: false,
      convertImagesToLinks: true,
      noModals: true,
      showLowRepImageUploadWarning: true,
      reputationToPostImages: 10,
      bindNavPrevention: true,
      postfix: "",
      imageUploader: {
      brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
      contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
      allowUrls: true
      },
      onDemand: true,
      discardSelector: ".discard-answer"
      ,immediatelyShowMarkdownHelp:true
      });


      }
      });














      draft saved

      draft discarded


















      StackExchange.ready(
      function () {
      StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1030483%2fstuck-at-ubuntu-logo-while-booting-in-18-04%23new-answer', 'question_page');
      }
      );

      Post as a guest















      Required, but never shown

























      3 Answers
      3






      active

      oldest

      votes








      3 Answers
      3






      active

      oldest

      votes









      active

      oldest

      votes






      active

      oldest

      votes









      2















      To resolve the issue, I have disabled Wayland in GDM3.



      sudo vi /etc/gdm3/custom.conf


      Change #WaylandEnable=false to WaylandEnable=false and reboot the
      system.




      This can be done in two ways,





      1. Set nomodeset to login,and follow the above steps. (In my case, I've already set nomodeset which was an easy way)

      2. With live dvd or bootable media: make sure the path of your installed drive
        /media/ubuntu/XXX/etc/gdm3/custom.conf which can be found with df -h


      UPDATE:



      It seems like this bug has been fixed with upgrading mutter package, so if the above solution did not workout, try to upgrade mutter package.






      share|improve this answer


























      • If you need to boot with Live-CD/USB to edit that file, remember to edit the file installed on the hard drive, something like: Files - Other Locations - NN GB file system - Ctrl+Alt+T - sudo gedit /media/ubuntu/blah/etc/gdm3/custom.conf

        – Randall Whitman
        Sep 12 '18 at 2:50


















      2















      To resolve the issue, I have disabled Wayland in GDM3.



      sudo vi /etc/gdm3/custom.conf


      Change #WaylandEnable=false to WaylandEnable=false and reboot the
      system.




      This can be done in two ways,





      1. Set nomodeset to login,and follow the above steps. (In my case, I've already set nomodeset which was an easy way)

      2. With live dvd or bootable media: make sure the path of your installed drive
        /media/ubuntu/XXX/etc/gdm3/custom.conf which can be found with df -h


      UPDATE:



      It seems like this bug has been fixed with upgrading mutter package, so if the above solution did not workout, try to upgrade mutter package.






      share|improve this answer


























      • If you need to boot with Live-CD/USB to edit that file, remember to edit the file installed on the hard drive, something like: Files - Other Locations - NN GB file system - Ctrl+Alt+T - sudo gedit /media/ubuntu/blah/etc/gdm3/custom.conf

        – Randall Whitman
        Sep 12 '18 at 2:50
















      2












      2








      2








      To resolve the issue, I have disabled Wayland in GDM3.



      sudo vi /etc/gdm3/custom.conf


      Change #WaylandEnable=false to WaylandEnable=false and reboot the
      system.




      This can be done in two ways,





      1. Set nomodeset to login,and follow the above steps. (In my case, I've already set nomodeset which was an easy way)

      2. With live dvd or bootable media: make sure the path of your installed drive
        /media/ubuntu/XXX/etc/gdm3/custom.conf which can be found with df -h


      UPDATE:



      It seems like this bug has been fixed with upgrading mutter package, so if the above solution did not workout, try to upgrade mutter package.






      share|improve this answer
















      To resolve the issue, I have disabled Wayland in GDM3.



      sudo vi /etc/gdm3/custom.conf


      Change #WaylandEnable=false to WaylandEnable=false and reboot the
      system.




      This can be done in two ways,





      1. Set nomodeset to login,and follow the above steps. (In my case, I've already set nomodeset which was an easy way)

      2. With live dvd or bootable media: make sure the path of your installed drive
        /media/ubuntu/XXX/etc/gdm3/custom.conf which can be found with df -h


      UPDATE:



      It seems like this bug has been fixed with upgrading mutter package, so if the above solution did not workout, try to upgrade mutter package.







      share|improve this answer














      share|improve this answer



      share|improve this answer








      edited 58 mins ago

























      answered Jun 5 '18 at 10:08









      d a i s yd a i s y

      3,30582344




      3,30582344













      • If you need to boot with Live-CD/USB to edit that file, remember to edit the file installed on the hard drive, something like: Files - Other Locations - NN GB file system - Ctrl+Alt+T - sudo gedit /media/ubuntu/blah/etc/gdm3/custom.conf

        – Randall Whitman
        Sep 12 '18 at 2:50





















      • If you need to boot with Live-CD/USB to edit that file, remember to edit the file installed on the hard drive, something like: Files - Other Locations - NN GB file system - Ctrl+Alt+T - sudo gedit /media/ubuntu/blah/etc/gdm3/custom.conf

        – Randall Whitman
        Sep 12 '18 at 2:50



















      If you need to boot with Live-CD/USB to edit that file, remember to edit the file installed on the hard drive, something like: Files - Other Locations - NN GB file system - Ctrl+Alt+T - sudo gedit /media/ubuntu/blah/etc/gdm3/custom.conf

      – Randall Whitman
      Sep 12 '18 at 2:50







      If you need to boot with Live-CD/USB to edit that file, remember to edit the file installed on the hard drive, something like: Files - Other Locations - NN GB file system - Ctrl+Alt+T - sudo gedit /media/ubuntu/blah/etc/gdm3/custom.conf

      – Randall Whitman
      Sep 12 '18 at 2:50















      0














      I had the same problem. I tried a fresh install of Ubuntu 18.04 on a Dell Latitude D620, it booted fine from USB drive but after restart it just showed the ubuntu logo and the mouse cursor, but the system was not responding to CTRL+F2/F3 or mouse movements.



      My hardware:



      lspci -nnk | grep -iA2 vga
      00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03)
      Subsystem: Dell Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [1028:01c2]
      Kernel driver in use: i915


      So adding nomodeset to /etc/default/grub the system was able to boot I was stuck with the wrong resolution of 1024x768 instead of the 1280x800. So it is not a solution I wanted to live with.



      Finally I found a good work around:



      sudo apt-get install lightdm


      Installing lightdm as Display Manager instead of the default gdm3 solved the problem with the Intel 945GM (i915) and the frozen ubuntu logo.



      P.S.: WLAN was also not working with the integrated Broadcom BCM4311.



      lspci -vnn | grep 14e4 
      09:00.0 Ethernet controller [0200]: Broadcom Limited NetXtreme BCM5752 Gigabit Ethernet PCI Express [14e4:1600] (rev 02)
      0c:00.0 Network controller [0280]: Broadcom Limited BCM4311 802.11b/g WLAN [14e4:4311] (rev 01)


      Solution was installing the firmware-b43-installer (https://askubuntu.com/a/609420/127023).






      share|improve this answer




























        0














        I had the same problem. I tried a fresh install of Ubuntu 18.04 on a Dell Latitude D620, it booted fine from USB drive but after restart it just showed the ubuntu logo and the mouse cursor, but the system was not responding to CTRL+F2/F3 or mouse movements.



        My hardware:



        lspci -nnk | grep -iA2 vga
        00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03)
        Subsystem: Dell Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [1028:01c2]
        Kernel driver in use: i915


        So adding nomodeset to /etc/default/grub the system was able to boot I was stuck with the wrong resolution of 1024x768 instead of the 1280x800. So it is not a solution I wanted to live with.



        Finally I found a good work around:



        sudo apt-get install lightdm


        Installing lightdm as Display Manager instead of the default gdm3 solved the problem with the Intel 945GM (i915) and the frozen ubuntu logo.



        P.S.: WLAN was also not working with the integrated Broadcom BCM4311.



        lspci -vnn | grep 14e4 
        09:00.0 Ethernet controller [0200]: Broadcom Limited NetXtreme BCM5752 Gigabit Ethernet PCI Express [14e4:1600] (rev 02)
        0c:00.0 Network controller [0280]: Broadcom Limited BCM4311 802.11b/g WLAN [14e4:4311] (rev 01)


        Solution was installing the firmware-b43-installer (https://askubuntu.com/a/609420/127023).






        share|improve this answer


























          0












          0








          0







          I had the same problem. I tried a fresh install of Ubuntu 18.04 on a Dell Latitude D620, it booted fine from USB drive but after restart it just showed the ubuntu logo and the mouse cursor, but the system was not responding to CTRL+F2/F3 or mouse movements.



          My hardware:



          lspci -nnk | grep -iA2 vga
          00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03)
          Subsystem: Dell Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [1028:01c2]
          Kernel driver in use: i915


          So adding nomodeset to /etc/default/grub the system was able to boot I was stuck with the wrong resolution of 1024x768 instead of the 1280x800. So it is not a solution I wanted to live with.



          Finally I found a good work around:



          sudo apt-get install lightdm


          Installing lightdm as Display Manager instead of the default gdm3 solved the problem with the Intel 945GM (i915) and the frozen ubuntu logo.



          P.S.: WLAN was also not working with the integrated Broadcom BCM4311.



          lspci -vnn | grep 14e4 
          09:00.0 Ethernet controller [0200]: Broadcom Limited NetXtreme BCM5752 Gigabit Ethernet PCI Express [14e4:1600] (rev 02)
          0c:00.0 Network controller [0280]: Broadcom Limited BCM4311 802.11b/g WLAN [14e4:4311] (rev 01)


          Solution was installing the firmware-b43-installer (https://askubuntu.com/a/609420/127023).






          share|improve this answer













          I had the same problem. I tried a fresh install of Ubuntu 18.04 on a Dell Latitude D620, it booted fine from USB drive but after restart it just showed the ubuntu logo and the mouse cursor, but the system was not responding to CTRL+F2/F3 or mouse movements.



          My hardware:



          lspci -nnk | grep -iA2 vga
          00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03)
          Subsystem: Dell Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [1028:01c2]
          Kernel driver in use: i915


          So adding nomodeset to /etc/default/grub the system was able to boot I was stuck with the wrong resolution of 1024x768 instead of the 1280x800. So it is not a solution I wanted to live with.



          Finally I found a good work around:



          sudo apt-get install lightdm


          Installing lightdm as Display Manager instead of the default gdm3 solved the problem with the Intel 945GM (i915) and the frozen ubuntu logo.



          P.S.: WLAN was also not working with the integrated Broadcom BCM4311.



          lspci -vnn | grep 14e4 
          09:00.0 Ethernet controller [0200]: Broadcom Limited NetXtreme BCM5752 Gigabit Ethernet PCI Express [14e4:1600] (rev 02)
          0c:00.0 Network controller [0280]: Broadcom Limited BCM4311 802.11b/g WLAN [14e4:4311] (rev 01)


          Solution was installing the firmware-b43-installer (https://askubuntu.com/a/609420/127023).







          share|improve this answer












          share|improve this answer



          share|improve this answer










          answered Jun 25 '18 at 21:51









          SOL-InvictusSOL-Invictus

          535




          535























              0














              Update: I switched to Unity after lightdm+Gnome was crashing (*)



              I had the same problem with i915 module. The screen was freezing when booting after the cursor was appearing on the screen. It was solved by replacing gdm by lightdm as described above. Summarizing the recipe:





              1. Boot by adding the nomodeset option:



                a. Hold SHIFT to see GRUB menu before booting

                b. Press e and add nomodeset at the line
                linux /boot,vmlinuz-.... root=UUID=... ro quiet splash nomodeset
                and then press F10 to reboot.



              2. Start with low resolution screen with the above mentioned results.

              3. Install lightdm+unity desktop and choose it as default.

                sudo apt-get install lightdm;
                sudo apt-get install ubuntu-unity-desktop

              4. Reboot.


              (*) i915 module error messages from dmesg, the session was forcingly logging out






              share|improve this answer






























                0














                Update: I switched to Unity after lightdm+Gnome was crashing (*)



                I had the same problem with i915 module. The screen was freezing when booting after the cursor was appearing on the screen. It was solved by replacing gdm by lightdm as described above. Summarizing the recipe:





                1. Boot by adding the nomodeset option:



                  a. Hold SHIFT to see GRUB menu before booting

                  b. Press e and add nomodeset at the line
                  linux /boot,vmlinuz-.... root=UUID=... ro quiet splash nomodeset
                  and then press F10 to reboot.



                2. Start with low resolution screen with the above mentioned results.

                3. Install lightdm+unity desktop and choose it as default.

                  sudo apt-get install lightdm;
                  sudo apt-get install ubuntu-unity-desktop

                4. Reboot.


                (*) i915 module error messages from dmesg, the session was forcingly logging out






                share|improve this answer




























                  0












                  0








                  0







                  Update: I switched to Unity after lightdm+Gnome was crashing (*)



                  I had the same problem with i915 module. The screen was freezing when booting after the cursor was appearing on the screen. It was solved by replacing gdm by lightdm as described above. Summarizing the recipe:





                  1. Boot by adding the nomodeset option:



                    a. Hold SHIFT to see GRUB menu before booting

                    b. Press e and add nomodeset at the line
                    linux /boot,vmlinuz-.... root=UUID=... ro quiet splash nomodeset
                    and then press F10 to reboot.



                  2. Start with low resolution screen with the above mentioned results.

                  3. Install lightdm+unity desktop and choose it as default.

                    sudo apt-get install lightdm;
                    sudo apt-get install ubuntu-unity-desktop

                  4. Reboot.


                  (*) i915 module error messages from dmesg, the session was forcingly logging out






                  share|improve this answer















                  Update: I switched to Unity after lightdm+Gnome was crashing (*)



                  I had the same problem with i915 module. The screen was freezing when booting after the cursor was appearing on the screen. It was solved by replacing gdm by lightdm as described above. Summarizing the recipe:





                  1. Boot by adding the nomodeset option:



                    a. Hold SHIFT to see GRUB menu before booting

                    b. Press e and add nomodeset at the line
                    linux /boot,vmlinuz-.... root=UUID=... ro quiet splash nomodeset
                    and then press F10 to reboot.



                  2. Start with low resolution screen with the above mentioned results.

                  3. Install lightdm+unity desktop and choose it as default.

                    sudo apt-get install lightdm;
                    sudo apt-get install ubuntu-unity-desktop

                  4. Reboot.


                  (*) i915 module error messages from dmesg, the session was forcingly logging out







                  share|improve this answer














                  share|improve this answer



                  share|improve this answer








                  edited Jul 22 '18 at 10:56

























                  answered Jul 21 '18 at 7:15









                  Konstantinos AnagnostopoulosKonstantinos Anagnostopoulos

                  11




                  11






























                      draft saved

                      draft discarded




















































                      Thanks for contributing an answer to Ask Ubuntu!


                      • Please be sure to answer the question. Provide details and share your research!

                      But avoid



                      • Asking for help, clarification, or responding to other answers.

                      • Making statements based on opinion; back them up with references or personal experience.


                      To learn more, see our tips on writing great answers.




                      draft saved


                      draft discarded














                      StackExchange.ready(
                      function () {
                      StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1030483%2fstuck-at-ubuntu-logo-while-booting-in-18-04%23new-answer', 'question_page');
                      }
                      );

                      Post as a guest















                      Required, but never shown





















































                      Required, but never shown














                      Required, but never shown












                      Required, but never shown







                      Required, but never shown

































                      Required, but never shown














                      Required, but never shown












                      Required, but never shown







                      Required, but never shown







                      Popular posts from this blog

                      GameSpot

                      日野市

                      Tu-95轟炸機