Setting a Static Ip on Ubuntu
I'm struggling with setting my static ip, nothing seems to work.
When I enter my interfaces, it says (by default):
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
And that's okay, so, now I just want to assign a static ip, and I am using the wlan0 device in order to do so, as eth0 is unavailable. I try to add in below, for example:
auto wlan0
iface wlan0 inet static
address 192.168.0.87/24
netmask 255.255.255.0
network 192.168.0.0
broadcast 192.168.0.255
gateway 192.168.0.1
dns-nameservers 192.168.0.1, 192.168.0.87/24, 8.8.8.8
wpa-ssid 'user'
wpa-psk 'password' # I also tried it with hex value without quotation marks
For sure, I know that my gateway is like that, all of it comes from the interface settings under nmcli dev list iface wlan0, but then it does not work. When I reboot the system, despite my network manager is properly disabled, the connections do not work, it just freezes and times out every time.
What could possibly wrong here?
wireless networking server network-manager dns
asked Sep 30 '14 at 10:58
Maciej SitkoMaciej Sitko
21112
add a comment |
I'm struggling with setting my static ip, nothing seems to work.
When I enter my interfaces, it says (by default):
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
And that's okay, so, now I just want to assign a static ip, and I am using the wlan0 device in order to do so, as eth0 is unavailable. I try to add in below, for example:
auto wlan0
iface wlan0 inet static
address 192.168.0.87/24
netmask 255.255.255.0
network 192.168.0.0
broadcast 192.168.0.255
gateway 192.168.0.1
dns-nameservers 192.168.0.1, 192.168.0.87/24, 8.8.8.8
wpa-ssid 'user'
wpa-psk 'password' # I also tried it with hex value without quotation marks
For sure, I know that my gateway is like that, all of it comes from the interface settings under nmcli dev list iface wlan0, but then it does not work. When I reboot the system, despite my network manager is properly disabled, the connections do not work, it just freezes and times out every time.
What could possibly wrong here?
wireless networking server network-manager dns
asked Sep 30 '14 at 10:58
Maciej SitkoMaciej Sitko
21112
2
Address needs to be a single address, not a range. Leave out the /24, also applies to dns
– Jan
Sep 30 '14 at 11:02
2
Unless this is server (no GUI) you should consider setting your interface via the network-manager nm-applet GUI instead of modifying the /etc/network/interfaces file.
– steeldriver
Sep 30 '14 at 11:16
The fault was ultimately the matter or removing quotation marks from the username and putting a value in a hex way. Anyway, I took notes off from your hints and I'll improve my game. Thanks.
– Maciej Sitko
Sep 30 '14 at 12:13
add a comment |
I'm struggling with setting my static ip, nothing seems to work.
When I enter my interfaces, it says (by default):
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
And that's okay, so, now I just want to assign a static ip, and I am using the wlan0 device in order to do so, as eth0 is unavailable. I try to add in below, for example:
auto wlan0
iface wlan0 inet static
address 192.168.0.87/24
netmask 255.255.255.0
network 192.168.0.0
broadcast 192.168.0.255
gateway 192.168.0.1
dns-nameservers 192.168.0.1, 192.168.0.87/24, 8.8.8.8
wpa-ssid 'user'
wpa-psk 'password' # I also tried it with hex value without quotation marks
For sure, I know that my gateway is like that, all of it comes from the interface settings under nmcli dev list iface wlan0, but then it does not work. When I reboot the system, despite my network manager is properly disabled, the connections do not work, it just freezes and times out every time.
What could possibly wrong here?
wireless networking server network-manager dns
asked Sep 30 '14 at 10:58
Maciej SitkoMaciej Sitko
21112
I'm struggling with setting my static ip, nothing seems to work.
When I enter my interfaces, it says (by default):
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
And that's okay, so, now I just want to assign a static ip, and I am using the wlan0 device in order to do so, as eth0 is unavailable. I try to add in below, for example:
auto wlan0
iface wlan0 inet static
address 192.168.0.87/24
netmask 255.255.255.0
network 192.168.0.0
broadcast 192.168.0.255
gateway 192.168.0.1
dns-nameservers 192.168.0.1, 192.168.0.87/24, 8.8.8.8
wpa-ssid 'user'
wpa-psk 'password' # I also tried it with hex value without quotation marks
For sure, I know that my gateway is like that, all of it comes from the interface settings under nmcli dev list iface wlan0, but then it does not work. When I reboot the system, despite my network manager is properly disabled, the connections do not work, it just freezes and times out every time.
What could possibly wrong here?
wireless networking server network-manager dns
wireless networking server network-manager dns
asked Sep 30 '14 at 10:58
Maciej SitkoMaciej Sitko
21112
asked Sep 30 '14 at 10:58
Maciej SitkoMaciej Sitko
21112
asked Sep 30 '14 at 10:58
Maciej SitkoMaciej Sitko
21112
asked Sep 30 '14 at 10:58
Maciej SitkoMaciej Sitko
21112
asked Sep 30 '14 at 10:58
Maciej SitkoMaciej Sitko
21112
21112
2
Address needs to be a single address, not a range. Leave out the /24, also applies to dns
– Jan
Sep 30 '14 at 11:02
2
Unless this is server (no GUI) you should consider setting your interface via the network-manager nm-applet GUI instead of modifying the /etc/network/interfaces file.
– steeldriver
Sep 30 '14 at 11:16
The fault was ultimately the matter or removing quotation marks from the username and putting a value in a hex way. Anyway, I took notes off from your hints and I'll improve my game. Thanks.
– Maciej Sitko
Sep 30 '14 at 12:13
add a comment |
2
Address needs to be a single address, not a range. Leave out the /24, also applies to dns
– Jan
Sep 30 '14 at 11:02
2
Unless this is server (no GUI) you should consider setting your interface via the network-manager nm-applet GUI instead of modifying the /etc/network/interfaces file.
– steeldriver
Sep 30 '14 at 11:16
The fault was ultimately the matter or removing quotation marks from the username and putting a value in a hex way. Anyway, I took notes off from your hints and I'll improve my game. Thanks.
– Maciej Sitko
Sep 30 '14 at 12:13
2
2
Address needs to be a single address, not a range. Leave out the /24, also applies to dns
– Jan
Sep 30 '14 at 11:02
Address needs to be a single address, not a range. Leave out the /24, also applies to dns
– Jan
Sep 30 '14 at 11:02
2
2
Unless this is server (no GUI) you should consider setting your interface via the network-manager nm-applet GUI instead of modifying the /etc/network/interfaces file.
– steeldriver
Sep 30 '14 at 11:16
Unless this is server (no GUI) you should consider setting your interface via the network-manager nm-applet GUI instead of modifying the /etc/network/interfaces file.
– steeldriver
Sep 30 '14 at 11:16
The fault was ultimately the matter or removing quotation marks from the username and putting a value in a hex way. Anyway, I took notes off from your hints and I'll improve my game. Thanks.
– Maciej Sitko
Sep 30 '14 at 12:13
The fault was ultimately the matter or removing quotation marks from the username and putting a value in a hex way. Anyway, I took notes off from your hints and I'll improve my game. Thanks.
– Maciej Sitko
Sep 30 '14 at 12:13
add a comment |
3 Answers
3
active
oldest
votes
Using the Network Manager GUI did the trick for me on Xubuntu 16.04:
Edit the wifi connection, and on IPv4 tab, enter:
- Method: Manual
- Address: xxx.xxx.xxx.xxx (your static address,in this case: 192.168.1.128)
- Netmask: 24
- Gateway: xxx.xxx.xxx.xxx (your gateway address,in this case: 192.168.1.1)
- DNS Server: xxx.xxx.xxx.xxx (your gateway address,in this case: 192.168.1.1)
Here's an example screenshot:
edited 13 mins ago
Kevin Bowen
14.6k155970
answered Mar 29 '17 at 18:39
DanielDaniel
5111
1
Hello and welcome to Ask Ubuntu! While this is a good first answer, it can still be improved, with, say, a screenshot. If you feel like this is a good idea, please feel free to edit it into your answer. Otherwise, I'd recommend you read our tour and How to Answer page in order to get a better idea of how this site works, and how to better keep providing awesome content!
– Kaz Wolfe
Mar 29 '17 at 18:43
how do you find your static and gateway address?
– ben432rew
Jul 15 '17 at 1:45
1
@ben432rew gateway is the ip of your router, and static is the address you chose (should be done through router first)
– smac89
Sep 10 '18 at 1:45
add a comment |
Test this:
Open a terminal.
Run it:
sudo -i
nano /etc/network/interfaces
Add the following lines for you wifi lan adaptor.
----------------------------------------------
# The wifi network interface
auto wlan0
iface wlan0 inet static
address 192.168.0.87
netmask 255.255.255.0
network 192.168.0.0
broadcast 192.168.0.255
gateway 192.168.0.1
dns-nameservers 192.168.0.1, 8.8.8.8
wpa-ssid <Your wifi network SSID>
wpa-psk <Your hex encoded wifi WPA password>
-----------------------------------------------
Control + O, save file. Control + X, close nano.
answered Sep 30 '14 at 11:41
kyodakekyodake
9,80811932
add a comment |
To setting up a static IP in Ubuntu the proper way is:
Disable the graphical management of your network connection in /etc/NetworkManager/NetworkManager.conf
Gather the information for the static IP (interface, IP to be used, default gateway, subnet, DNS)
Modify /etc/network/interfaces to include the information above.
Restart networking and network-manager services.
answered Oct 4 '14 at 14:32
Harshal BenakeHarshal Benake
204114
"These instructions assume you are using a wired ethernet port to set a static IP on..."
– arsaKasra
Apr 15 '16 at 12:54
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "89"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f530522%2fsetting-a-static-ip-on-ubuntu%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
3 Answers
3
active
oldest
votes
3 Answers
3
active
oldest
votes
active
oldest
votes
active
oldest
votes
Using the Network Manager GUI did the trick for me on Xubuntu 16.04:
Edit the wifi connection, and on IPv4 tab, enter:
- Method: Manual
- Address: xxx.xxx.xxx.xxx (your static address,in this case: 192.168.1.128)
- Netmask: 24
- Gateway: xxx.xxx.xxx.xxx (your gateway address,in this case: 192.168.1.1)
- DNS Server: xxx.xxx.xxx.xxx (your gateway address,in this case: 192.168.1.1)
Here's an example screenshot:
edited 13 mins ago
Kevin Bowen
14.6k155970
answered Mar 29 '17 at 18:39
DanielDaniel
5111
1
Hello and welcome to Ask Ubuntu! While this is a good first answer, it can still be improved, with, say, a screenshot. If you feel like this is a good idea, please feel free to edit it into your answer. Otherwise, I'd recommend you read our tour and How to Answer page in order to get a better idea of how this site works, and how to better keep providing awesome content!
– Kaz Wolfe
Mar 29 '17 at 18:43
how do you find your static and gateway address?
– ben432rew
Jul 15 '17 at 1:45
1
@ben432rew gateway is the ip of your router, and static is the address you chose (should be done through router first)
– smac89
Sep 10 '18 at 1:45
add a comment |
Using the Network Manager GUI did the trick for me on Xubuntu 16.04:
Edit the wifi connection, and on IPv4 tab, enter:
- Method: Manual
- Address: xxx.xxx.xxx.xxx (your static address,in this case: 192.168.1.128)
- Netmask: 24
- Gateway: xxx.xxx.xxx.xxx (your gateway address,in this case: 192.168.1.1)
- DNS Server: xxx.xxx.xxx.xxx (your gateway address,in this case: 192.168.1.1)
Here's an example screenshot:
edited 13 mins ago
Kevin Bowen
14.6k155970
answered Mar 29 '17 at 18:39
DanielDaniel
5111
1
Hello and welcome to Ask Ubuntu! While this is a good first answer, it can still be improved, with, say, a screenshot. If you feel like this is a good idea, please feel free to edit it into your answer. Otherwise, I'd recommend you read our tour and How to Answer page in order to get a better idea of how this site works, and how to better keep providing awesome content!
– Kaz Wolfe
Mar 29 '17 at 18:43
how do you find your static and gateway address?
– ben432rew
Jul 15 '17 at 1:45
1
@ben432rew gateway is the ip of your router, and static is the address you chose (should be done through router first)
– smac89
Sep 10 '18 at 1:45
add a comment |
Using the Network Manager GUI did the trick for me on Xubuntu 16.04:
Edit the wifi connection, and on IPv4 tab, enter:
- Method: Manual
- Address: xxx.xxx.xxx.xxx (your static address,in this case: 192.168.1.128)
- Netmask: 24
- Gateway: xxx.xxx.xxx.xxx (your gateway address,in this case: 192.168.1.1)
- DNS Server: xxx.xxx.xxx.xxx (your gateway address,in this case: 192.168.1.1)
Here's an example screenshot:
edited 13 mins ago
Kevin Bowen
14.6k155970
answered Mar 29 '17 at 18:39
DanielDaniel
5111
Using the Network Manager GUI did the trick for me on Xubuntu 16.04:
Edit the wifi connection, and on IPv4 tab, enter:
- Method: Manual
- Address: xxx.xxx.xxx.xxx (your static address,in this case: 192.168.1.128)
- Netmask: 24
- Gateway: xxx.xxx.xxx.xxx (your gateway address,in this case: 192.168.1.1)
- DNS Server: xxx.xxx.xxx.xxx (your gateway address,in this case: 192.168.1.1)
Here's an example screenshot:
edited 13 mins ago
Kevin Bowen
14.6k155970
answered Mar 29 '17 at 18:39
DanielDaniel
5111
edited 13 mins ago
Kevin Bowen
14.6k155970
edited 13 mins ago
Kevin Bowen
14.6k155970
edited 13 mins ago
Kevin Bowen
14.6k155970
14.6k155970
answered Mar 29 '17 at 18:39
DanielDaniel
5111
answered Mar 29 '17 at 18:39
DanielDaniel
5111
answered Mar 29 '17 at 18:39
DanielDaniel
5111
5111
1
Hello and welcome to Ask Ubuntu! While this is a good first answer, it can still be improved, with, say, a screenshot. If you feel like this is a good idea, please feel free to edit it into your answer. Otherwise, I'd recommend you read our tour and How to Answer page in order to get a better idea of how this site works, and how to better keep providing awesome content!
– Kaz Wolfe
Mar 29 '17 at 18:43
how do you find your static and gateway address?
– ben432rew
Jul 15 '17 at 1:45
1
@ben432rew gateway is the ip of your router, and static is the address you chose (should be done through router first)
– smac89
Sep 10 '18 at 1:45
add a comment |
1
Hello and welcome to Ask Ubuntu! While this is a good first answer, it can still be improved, with, say, a screenshot. If you feel like this is a good idea, please feel free to edit it into your answer. Otherwise, I'd recommend you read our tour and How to Answer page in order to get a better idea of how this site works, and how to better keep providing awesome content!
– Kaz Wolfe
Mar 29 '17 at 18:43
how do you find your static and gateway address?
– ben432rew
Jul 15 '17 at 1:45
1
@ben432rew gateway is the ip of your router, and static is the address you chose (should be done through router first)
– smac89
Sep 10 '18 at 1:45
1
1
Hello and welcome to Ask Ubuntu! While this is a good first answer, it can still be improved, with, say, a screenshot. If you feel like this is a good idea, please feel free to edit it into your answer. Otherwise, I'd recommend you read our tour and How to Answer page in order to get a better idea of how this site works, and how to better keep providing awesome content!
– Kaz Wolfe
Mar 29 '17 at 18:43
Hello and welcome to Ask Ubuntu! While this is a good first answer, it can still be improved, with, say, a screenshot. If you feel like this is a good idea, please feel free to edit it into your answer. Otherwise, I'd recommend you read our tour and How to Answer page in order to get a better idea of how this site works, and how to better keep providing awesome content!
– Kaz Wolfe
Mar 29 '17 at 18:43
how do you find your static and gateway address?
– ben432rew
Jul 15 '17 at 1:45
how do you find your static and gateway address?
– ben432rew
Jul 15 '17 at 1:45
1
1
@ben432rew gateway is the ip of your router, and static is the address you chose (should be done through router first)
– smac89
Sep 10 '18 at 1:45
@ben432rew gateway is the ip of your router, and static is the address you chose (should be done through router first)
– smac89
Sep 10 '18 at 1:45
add a comment |
Test this:
Open a terminal.
Run it:
sudo -i
nano /etc/network/interfaces
Add the following lines for you wifi lan adaptor.
----------------------------------------------
# The wifi network interface
auto wlan0
iface wlan0 inet static
address 192.168.0.87
netmask 255.255.255.0
network 192.168.0.0
broadcast 192.168.0.255
gateway 192.168.0.1
dns-nameservers 192.168.0.1, 8.8.8.8
wpa-ssid <Your wifi network SSID>
wpa-psk <Your hex encoded wifi WPA password>
-----------------------------------------------
Control + O, save file. Control + X, close nano.
answered Sep 30 '14 at 11:41
kyodakekyodake
9,80811932
add a comment |
Test this:
Open a terminal.
Run it:
sudo -i
nano /etc/network/interfaces
Add the following lines for you wifi lan adaptor.
----------------------------------------------
# The wifi network interface
auto wlan0
iface wlan0 inet static
address 192.168.0.87
netmask 255.255.255.0
network 192.168.0.0
broadcast 192.168.0.255
gateway 192.168.0.1
dns-nameservers 192.168.0.1, 8.8.8.8
wpa-ssid <Your wifi network SSID>
wpa-psk <Your hex encoded wifi WPA password>
-----------------------------------------------
Control + O, save file. Control + X, close nano.
answered Sep 30 '14 at 11:41
kyodakekyodake
9,80811932
add a comment |
Test this:
Open a terminal.
Run it:
sudo -i
nano /etc/network/interfaces
Add the following lines for you wifi lan adaptor.
----------------------------------------------
# The wifi network interface
auto wlan0
iface wlan0 inet static
address 192.168.0.87
netmask 255.255.255.0
network 192.168.0.0
broadcast 192.168.0.255
gateway 192.168.0.1
dns-nameservers 192.168.0.1, 8.8.8.8
wpa-ssid <Your wifi network SSID>
wpa-psk <Your hex encoded wifi WPA password>
-----------------------------------------------
Control + O, save file. Control + X, close nano.
answered Sep 30 '14 at 11:41
kyodakekyodake
9,80811932
Test this:
Open a terminal.
Run it:
sudo -i
nano /etc/network/interfaces
Add the following lines for you wifi lan adaptor.
----------------------------------------------
# The wifi network interface
auto wlan0
iface wlan0 inet static
address 192.168.0.87
netmask 255.255.255.0
network 192.168.0.0
broadcast 192.168.0.255
gateway 192.168.0.1
dns-nameservers 192.168.0.1, 8.8.8.8
wpa-ssid <Your wifi network SSID>
wpa-psk <Your hex encoded wifi WPA password>
-----------------------------------------------
Control + O, save file. Control + X, close nano.
answered Sep 30 '14 at 11:41
kyodakekyodake
9,80811932
answered Sep 30 '14 at 11:41
kyodakekyodake
9,80811932
answered Sep 30 '14 at 11:41
kyodakekyodake
9,80811932
answered Sep 30 '14 at 11:41
kyodakekyodake
9,80811932
9,80811932
add a comment |
add a comment |
To setting up a static IP in Ubuntu the proper way is:
Disable the graphical management of your network connection in /etc/NetworkManager/NetworkManager.conf
Gather the information for the static IP (interface, IP to be used, default gateway, subnet, DNS)
Modify /etc/network/interfaces to include the information above.
Restart networking and network-manager services.
answered Oct 4 '14 at 14:32
Harshal BenakeHarshal Benake
204114
"These instructions assume you are using a wired ethernet port to set a static IP on..."
– arsaKasra
Apr 15 '16 at 12:54
add a comment |
To setting up a static IP in Ubuntu the proper way is:
Disable the graphical management of your network connection in /etc/NetworkManager/NetworkManager.conf
Gather the information for the static IP (interface, IP to be used, default gateway, subnet, DNS)
Modify /etc/network/interfaces to include the information above.
Restart networking and network-manager services.
answered Oct 4 '14 at 14:32
Harshal BenakeHarshal Benake
204114
"These instructions assume you are using a wired ethernet port to set a static IP on..."
– arsaKasra
Apr 15 '16 at 12:54
add a comment |
To setting up a static IP in Ubuntu the proper way is:
Disable the graphical management of your network connection in /etc/NetworkManager/NetworkManager.conf
Gather the information for the static IP (interface, IP to be used, default gateway, subnet, DNS)
Modify /etc/network/interfaces to include the information above.
Restart networking and network-manager services.
answered Oct 4 '14 at 14:32
Harshal BenakeHarshal Benake
204114
To setting up a static IP in Ubuntu the proper way is:
Disable the graphical management of your network connection in /etc/NetworkManager/NetworkManager.conf
Gather the information for the static IP (interface, IP to be used, default gateway, subnet, DNS)
Modify /etc/network/interfaces to include the information above.
Restart networking and network-manager services.
answered Oct 4 '14 at 14:32
Harshal BenakeHarshal Benake
204114
edited Aug 17 '16 at 16:49
answered Oct 4 '14 at 14:32
Harshal BenakeHarshal Benake
204114
answered Oct 4 '14 at 14:32
Harshal BenakeHarshal Benake
204114
answered Oct 4 '14 at 14:32
Harshal BenakeHarshal Benake
204114
204114
"These instructions assume you are using a wired ethernet port to set a static IP on..."
– arsaKasra
Apr 15 '16 at 12:54
add a comment |
"These instructions assume you are using a wired ethernet port to set a static IP on..."
– arsaKasra
Apr 15 '16 at 12:54
"These instructions assume you are using a wired ethernet port to set a static IP on..."
– arsaKasra
Apr 15 '16 at 12:54
"These instructions assume you are using a wired ethernet port to set a static IP on..."
– arsaKasra
Apr 15 '16 at 12:54
add a comment |
Thanks for contributing an answer to Ask Ubuntu!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f530522%2fsetting-a-static-ip-on-ubuntu%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
2
Address needs to be a single address, not a range. Leave out the /24, also applies to dns
– Jan
Sep 30 '14 at 11:02
2
Unless this is server (no GUI) you should consider setting your interface via the network-manager nm-applet GUI instead of modifying the /etc/network/interfaces file.
– steeldriver
Sep 30 '14 at 11:16
The fault was ultimately the matter or removing quotation marks from the username and putting a value in a hex way. Anyway, I took notes off from your hints and I'll improve my game. Thanks.
– Maciej Sitko
Sep 30 '14 at 12:13