Smblist and Findsmb difference












0















I'm having trouble connecting to a Windows Share. When I run the command



findsmb


it lists correctly all the samba servers on my local network.
However, when I run



smblist


it doesn't print any of the servers findsmb printed.
My smb.conf file is the following:



#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
# - When such options are commented with ";", the proposed setting
# differs from the default Samba behaviour
# - When commented with "#", the proposed setting is the default
# behaviour of Samba but the option is considered important
# enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = WORKGROUP
client max protocol = NT1

# server string is the equivalent of the NT Description field
server string = %h server (Samba, Ubuntu)

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
wins support = yes

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
dns proxy = no

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
; interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself. However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
; bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
# syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary
# domain controller", "classic backup domain controller", "active
# directory domain controller".
#
# Most people will want "standalone sever" or "member server".
# Running as "active directory domain controller" will require first
# running "samba-tool domain provision" to wipe databases and create a
# new domain.
server role = standalone server

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.
passdb backend = tdbsam

obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
passwd program = /usr/bin/passwd %u
passwd chat = *Entersnews*spassword:* %nn *Retypesnews*spassword:* %nn *passwordsupdatedssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
map to guest = bad user

########## Domains ###########

#
# The following settings only takes effect if 'server role = primary
# classic domain controller', 'server role = backup domain controller'
# or 'domain logons' is set
#

# It specifies the location of the user's
# profile directory from the client point of view) The following
# required a [profiles] share to be setup on the samba server (see
# below)
; logon path = \%Nprofiles%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
# logon path = \%N%Uprofile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
; logon drive = H:
# logon home = \%N%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
; logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe. The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe.
# The following assumes a "machines" group exists on the system
; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.
; add group script = /usr/sbin/addgroup --force-badname %g

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /home/samba/etc/smb.conf.%m

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
; idmap uid = 10000-20000
; idmap gid = 10000-20000
; template shell = /bin/bash

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
; usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
usershare allow guests = yes









share|improve this question



























    0















    I'm having trouble connecting to a Windows Share. When I run the command



    findsmb


    it lists correctly all the samba servers on my local network.
    However, when I run



    smblist


    it doesn't print any of the servers findsmb printed.
    My smb.conf file is the following:



    #
    # Sample configuration file for the Samba suite for Debian GNU/Linux.
    #
    #
    # This is the main Samba configuration file. You should read the
    # smb.conf(5) manual page in order to understand the options listed
    # here. Samba has a huge number of configurable options most of which
    # are not shown in this example
    #
    # Some options that are often worth tuning have been included as
    # commented-out examples in this file.
    # - When such options are commented with ";", the proposed setting
    # differs from the default Samba behaviour
    # - When commented with "#", the proposed setting is the default
    # behaviour of Samba but the option is considered important
    # enough to be mentioned here
    #
    # NOTE: Whenever you modify this file you should run the command
    # "testparm" to check that you have not made any basic syntactic
    # errors.

    #======================= Global Settings =======================

    [global]

    ## Browsing/Identification ###

    # Change this to the workgroup/NT-domain name your Samba server will part of
    workgroup = WORKGROUP
    client max protocol = NT1

    # server string is the equivalent of the NT Description field
    server string = %h server (Samba, Ubuntu)

    # Windows Internet Name Serving Support Section:
    # WINS Support - Tells the NMBD component of Samba to enable its WINS Server
    wins support = yes

    # WINS Server - Tells the NMBD components of Samba to be a WINS Client
    # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
    ; wins server = w.x.y.z

    # This will prevent nmbd to search for NetBIOS names through DNS.
    dns proxy = no

    #### Networking ####

    # The specific set of interfaces / networks to bind to
    # This can be either the interface name or an IP address/netmask;
    # interface names are normally preferred
    ; interfaces = 127.0.0.0/8 eth0

    # Only bind to the named interfaces and/or networks; you must use the
    # 'interfaces' option above to use this.
    # It is recommended that you enable this feature if your Samba machine is
    # not protected by a firewall or is a firewall itself. However, this
    # option cannot handle dynamic or non-broadcast interfaces correctly.
    ; bind interfaces only = yes



    #### Debugging/Accounting ####

    # This tells Samba to use a separate log file for each machine
    # that connects
    log file = /var/log/samba/log.%m

    # Cap the size of the individual log files (in KiB).
    max log size = 1000

    # If you want Samba to only log through syslog then set the following
    # parameter to 'yes'.
    # syslog only = no

    # We want Samba to log a minimum amount of information to syslog. Everything
    # should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
    # through syslog you should set the following parameter to something higher.
    syslog = 0

    # Do something sensible when Samba crashes: mail the admin a backtrace
    panic action = /usr/share/samba/panic-action %d


    ####### Authentication #######

    # Server role. Defines in which mode Samba will operate. Possible
    # values are "standalone server", "member server", "classic primary
    # domain controller", "classic backup domain controller", "active
    # directory domain controller".
    #
    # Most people will want "standalone sever" or "member server".
    # Running as "active directory domain controller" will require first
    # running "samba-tool domain provision" to wipe databases and create a
    # new domain.
    server role = standalone server

    # If you are using encrypted passwords, Samba will need to know what
    # password database type you are using.
    passdb backend = tdbsam

    obey pam restrictions = yes

    # This boolean parameter controls whether Samba attempts to sync the Unix
    # password with the SMB password when the encrypted SMB password in the
    # passdb is changed.
    unix password sync = yes

    # For Unix password sync to work on a Debian GNU/Linux system, the following
    # parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
    # sending the correct chat script for the passwd program in Debian Sarge).
    passwd program = /usr/bin/passwd %u
    passwd chat = *Entersnews*spassword:* %nn *Retypesnews*spassword:* %nn *passwordsupdatedssuccessfully* .

    # This boolean controls whether PAM will be used for password changes
    # when requested by an SMB client instead of the program listed in
    # 'passwd program'. The default is 'no'.
    pam password change = yes

    # This option controls how unsuccessful authentication attempts are mapped
    # to anonymous connections
    map to guest = bad user

    ########## Domains ###########

    #
    # The following settings only takes effect if 'server role = primary
    # classic domain controller', 'server role = backup domain controller'
    # or 'domain logons' is set
    #

    # It specifies the location of the user's
    # profile directory from the client point of view) The following
    # required a [profiles] share to be setup on the samba server (see
    # below)
    ; logon path = \%Nprofiles%U
    # Another common choice is storing the profile in the user's home directory
    # (this is Samba's default)
    # logon path = \%N%Uprofile

    # The following setting only takes effect if 'domain logons' is set
    # It specifies the location of a user's home directory (from the client
    # point of view)
    ; logon drive = H:
    # logon home = \%N%U

    # The following setting only takes effect if 'domain logons' is set
    # It specifies the script to run during logon. The script must be stored
    # in the [netlogon] share
    # NOTE: Must be store in 'DOS' file format convention
    ; logon script = logon.cmd

    # This allows Unix users to be created on the domain controller via the SAMR
    # RPC pipe. The example command creates a user account with a disabled Unix
    # password; please adapt to your needs
    ; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

    # This allows machine accounts to be created on the domain controller via the
    # SAMR RPC pipe.
    # The following assumes a "machines" group exists on the system
    ; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

    # This allows Unix groups to be created on the domain controller via the SAMR
    # RPC pipe.
    ; add group script = /usr/sbin/addgroup --force-badname %g

    ############ Misc ############

    # Using the following line enables you to customise your configuration
    # on a per machine basis. The %m gets replaced with the netbios name
    # of the machine that is connecting
    ; include = /home/samba/etc/smb.conf.%m

    # Some defaults for winbind (make sure you're not using the ranges
    # for something else.)
    ; idmap uid = 10000-20000
    ; idmap gid = 10000-20000
    ; template shell = /bin/bash

    # Setup usershare options to enable non-root users to share folders
    # with the net usershare command.

    # Maximum number of usershare. 0 (default) means that usershare is disabled.
    ; usershare max shares = 100

    # Allow users who've been granted usershare privileges to create
    # public shares, not just authenticated ones
    usershare allow guests = yes









    share|improve this question

























      0












      0








      0








      I'm having trouble connecting to a Windows Share. When I run the command



      findsmb


      it lists correctly all the samba servers on my local network.
      However, when I run



      smblist


      it doesn't print any of the servers findsmb printed.
      My smb.conf file is the following:



      #
      # Sample configuration file for the Samba suite for Debian GNU/Linux.
      #
      #
      # This is the main Samba configuration file. You should read the
      # smb.conf(5) manual page in order to understand the options listed
      # here. Samba has a huge number of configurable options most of which
      # are not shown in this example
      #
      # Some options that are often worth tuning have been included as
      # commented-out examples in this file.
      # - When such options are commented with ";", the proposed setting
      # differs from the default Samba behaviour
      # - When commented with "#", the proposed setting is the default
      # behaviour of Samba but the option is considered important
      # enough to be mentioned here
      #
      # NOTE: Whenever you modify this file you should run the command
      # "testparm" to check that you have not made any basic syntactic
      # errors.

      #======================= Global Settings =======================

      [global]

      ## Browsing/Identification ###

      # Change this to the workgroup/NT-domain name your Samba server will part of
      workgroup = WORKGROUP
      client max protocol = NT1

      # server string is the equivalent of the NT Description field
      server string = %h server (Samba, Ubuntu)

      # Windows Internet Name Serving Support Section:
      # WINS Support - Tells the NMBD component of Samba to enable its WINS Server
      wins support = yes

      # WINS Server - Tells the NMBD components of Samba to be a WINS Client
      # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
      ; wins server = w.x.y.z

      # This will prevent nmbd to search for NetBIOS names through DNS.
      dns proxy = no

      #### Networking ####

      # The specific set of interfaces / networks to bind to
      # This can be either the interface name or an IP address/netmask;
      # interface names are normally preferred
      ; interfaces = 127.0.0.0/8 eth0

      # Only bind to the named interfaces and/or networks; you must use the
      # 'interfaces' option above to use this.
      # It is recommended that you enable this feature if your Samba machine is
      # not protected by a firewall or is a firewall itself. However, this
      # option cannot handle dynamic or non-broadcast interfaces correctly.
      ; bind interfaces only = yes



      #### Debugging/Accounting ####

      # This tells Samba to use a separate log file for each machine
      # that connects
      log file = /var/log/samba/log.%m

      # Cap the size of the individual log files (in KiB).
      max log size = 1000

      # If you want Samba to only log through syslog then set the following
      # parameter to 'yes'.
      # syslog only = no

      # We want Samba to log a minimum amount of information to syslog. Everything
      # should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
      # through syslog you should set the following parameter to something higher.
      syslog = 0

      # Do something sensible when Samba crashes: mail the admin a backtrace
      panic action = /usr/share/samba/panic-action %d


      ####### Authentication #######

      # Server role. Defines in which mode Samba will operate. Possible
      # values are "standalone server", "member server", "classic primary
      # domain controller", "classic backup domain controller", "active
      # directory domain controller".
      #
      # Most people will want "standalone sever" or "member server".
      # Running as "active directory domain controller" will require first
      # running "samba-tool domain provision" to wipe databases and create a
      # new domain.
      server role = standalone server

      # If you are using encrypted passwords, Samba will need to know what
      # password database type you are using.
      passdb backend = tdbsam

      obey pam restrictions = yes

      # This boolean parameter controls whether Samba attempts to sync the Unix
      # password with the SMB password when the encrypted SMB password in the
      # passdb is changed.
      unix password sync = yes

      # For Unix password sync to work on a Debian GNU/Linux system, the following
      # parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
      # sending the correct chat script for the passwd program in Debian Sarge).
      passwd program = /usr/bin/passwd %u
      passwd chat = *Entersnews*spassword:* %nn *Retypesnews*spassword:* %nn *passwordsupdatedssuccessfully* .

      # This boolean controls whether PAM will be used for password changes
      # when requested by an SMB client instead of the program listed in
      # 'passwd program'. The default is 'no'.
      pam password change = yes

      # This option controls how unsuccessful authentication attempts are mapped
      # to anonymous connections
      map to guest = bad user

      ########## Domains ###########

      #
      # The following settings only takes effect if 'server role = primary
      # classic domain controller', 'server role = backup domain controller'
      # or 'domain logons' is set
      #

      # It specifies the location of the user's
      # profile directory from the client point of view) The following
      # required a [profiles] share to be setup on the samba server (see
      # below)
      ; logon path = \%Nprofiles%U
      # Another common choice is storing the profile in the user's home directory
      # (this is Samba's default)
      # logon path = \%N%Uprofile

      # The following setting only takes effect if 'domain logons' is set
      # It specifies the location of a user's home directory (from the client
      # point of view)
      ; logon drive = H:
      # logon home = \%N%U

      # The following setting only takes effect if 'domain logons' is set
      # It specifies the script to run during logon. The script must be stored
      # in the [netlogon] share
      # NOTE: Must be store in 'DOS' file format convention
      ; logon script = logon.cmd

      # This allows Unix users to be created on the domain controller via the SAMR
      # RPC pipe. The example command creates a user account with a disabled Unix
      # password; please adapt to your needs
      ; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

      # This allows machine accounts to be created on the domain controller via the
      # SAMR RPC pipe.
      # The following assumes a "machines" group exists on the system
      ; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

      # This allows Unix groups to be created on the domain controller via the SAMR
      # RPC pipe.
      ; add group script = /usr/sbin/addgroup --force-badname %g

      ############ Misc ############

      # Using the following line enables you to customise your configuration
      # on a per machine basis. The %m gets replaced with the netbios name
      # of the machine that is connecting
      ; include = /home/samba/etc/smb.conf.%m

      # Some defaults for winbind (make sure you're not using the ranges
      # for something else.)
      ; idmap uid = 10000-20000
      ; idmap gid = 10000-20000
      ; template shell = /bin/bash

      # Setup usershare options to enable non-root users to share folders
      # with the net usershare command.

      # Maximum number of usershare. 0 (default) means that usershare is disabled.
      ; usershare max shares = 100

      # Allow users who've been granted usershare privileges to create
      # public shares, not just authenticated ones
      usershare allow guests = yes









      share|improve this question














      I'm having trouble connecting to a Windows Share. When I run the command



      findsmb


      it lists correctly all the samba servers on my local network.
      However, when I run



      smblist


      it doesn't print any of the servers findsmb printed.
      My smb.conf file is the following:



      #
      # Sample configuration file for the Samba suite for Debian GNU/Linux.
      #
      #
      # This is the main Samba configuration file. You should read the
      # smb.conf(5) manual page in order to understand the options listed
      # here. Samba has a huge number of configurable options most of which
      # are not shown in this example
      #
      # Some options that are often worth tuning have been included as
      # commented-out examples in this file.
      # - When such options are commented with ";", the proposed setting
      # differs from the default Samba behaviour
      # - When commented with "#", the proposed setting is the default
      # behaviour of Samba but the option is considered important
      # enough to be mentioned here
      #
      # NOTE: Whenever you modify this file you should run the command
      # "testparm" to check that you have not made any basic syntactic
      # errors.

      #======================= Global Settings =======================

      [global]

      ## Browsing/Identification ###

      # Change this to the workgroup/NT-domain name your Samba server will part of
      workgroup = WORKGROUP
      client max protocol = NT1

      # server string is the equivalent of the NT Description field
      server string = %h server (Samba, Ubuntu)

      # Windows Internet Name Serving Support Section:
      # WINS Support - Tells the NMBD component of Samba to enable its WINS Server
      wins support = yes

      # WINS Server - Tells the NMBD components of Samba to be a WINS Client
      # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
      ; wins server = w.x.y.z

      # This will prevent nmbd to search for NetBIOS names through DNS.
      dns proxy = no

      #### Networking ####

      # The specific set of interfaces / networks to bind to
      # This can be either the interface name or an IP address/netmask;
      # interface names are normally preferred
      ; interfaces = 127.0.0.0/8 eth0

      # Only bind to the named interfaces and/or networks; you must use the
      # 'interfaces' option above to use this.
      # It is recommended that you enable this feature if your Samba machine is
      # not protected by a firewall or is a firewall itself. However, this
      # option cannot handle dynamic or non-broadcast interfaces correctly.
      ; bind interfaces only = yes



      #### Debugging/Accounting ####

      # This tells Samba to use a separate log file for each machine
      # that connects
      log file = /var/log/samba/log.%m

      # Cap the size of the individual log files (in KiB).
      max log size = 1000

      # If you want Samba to only log through syslog then set the following
      # parameter to 'yes'.
      # syslog only = no

      # We want Samba to log a minimum amount of information to syslog. Everything
      # should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
      # through syslog you should set the following parameter to something higher.
      syslog = 0

      # Do something sensible when Samba crashes: mail the admin a backtrace
      panic action = /usr/share/samba/panic-action %d


      ####### Authentication #######

      # Server role. Defines in which mode Samba will operate. Possible
      # values are "standalone server", "member server", "classic primary
      # domain controller", "classic backup domain controller", "active
      # directory domain controller".
      #
      # Most people will want "standalone sever" or "member server".
      # Running as "active directory domain controller" will require first
      # running "samba-tool domain provision" to wipe databases and create a
      # new domain.
      server role = standalone server

      # If you are using encrypted passwords, Samba will need to know what
      # password database type you are using.
      passdb backend = tdbsam

      obey pam restrictions = yes

      # This boolean parameter controls whether Samba attempts to sync the Unix
      # password with the SMB password when the encrypted SMB password in the
      # passdb is changed.
      unix password sync = yes

      # For Unix password sync to work on a Debian GNU/Linux system, the following
      # parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
      # sending the correct chat script for the passwd program in Debian Sarge).
      passwd program = /usr/bin/passwd %u
      passwd chat = *Entersnews*spassword:* %nn *Retypesnews*spassword:* %nn *passwordsupdatedssuccessfully* .

      # This boolean controls whether PAM will be used for password changes
      # when requested by an SMB client instead of the program listed in
      # 'passwd program'. The default is 'no'.
      pam password change = yes

      # This option controls how unsuccessful authentication attempts are mapped
      # to anonymous connections
      map to guest = bad user

      ########## Domains ###########

      #
      # The following settings only takes effect if 'server role = primary
      # classic domain controller', 'server role = backup domain controller'
      # or 'domain logons' is set
      #

      # It specifies the location of the user's
      # profile directory from the client point of view) The following
      # required a [profiles] share to be setup on the samba server (see
      # below)
      ; logon path = \%Nprofiles%U
      # Another common choice is storing the profile in the user's home directory
      # (this is Samba's default)
      # logon path = \%N%Uprofile

      # The following setting only takes effect if 'domain logons' is set
      # It specifies the location of a user's home directory (from the client
      # point of view)
      ; logon drive = H:
      # logon home = \%N%U

      # The following setting only takes effect if 'domain logons' is set
      # It specifies the script to run during logon. The script must be stored
      # in the [netlogon] share
      # NOTE: Must be store in 'DOS' file format convention
      ; logon script = logon.cmd

      # This allows Unix users to be created on the domain controller via the SAMR
      # RPC pipe. The example command creates a user account with a disabled Unix
      # password; please adapt to your needs
      ; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

      # This allows machine accounts to be created on the domain controller via the
      # SAMR RPC pipe.
      # The following assumes a "machines" group exists on the system
      ; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

      # This allows Unix groups to be created on the domain controller via the SAMR
      # RPC pipe.
      ; add group script = /usr/sbin/addgroup --force-badname %g

      ############ Misc ############

      # Using the following line enables you to customise your configuration
      # on a per machine basis. The %m gets replaced with the netbios name
      # of the machine that is connecting
      ; include = /home/samba/etc/smb.conf.%m

      # Some defaults for winbind (make sure you're not using the ranges
      # for something else.)
      ; idmap uid = 10000-20000
      ; idmap gid = 10000-20000
      ; template shell = /bin/bash

      # Setup usershare options to enable non-root users to share folders
      # with the net usershare command.

      # Maximum number of usershare. 0 (default) means that usershare is disabled.
      ; usershare max shares = 100

      # Allow users who've been granted usershare privileges to create
      # public shares, not just authenticated ones
      usershare allow guests = yes






      xubuntu windows samba thunar smb






      share|improve this question













      share|improve this question











      share|improve this question




      share|improve this question










      asked 1 hour ago









      Caio RamosCaio Ramos

      2115




      2115






















          0






          active

          oldest

          votes











          Your Answer








          StackExchange.ready(function() {
          var channelOptions = {
          tags: "".split(" "),
          id: "89"
          };
          initTagRenderer("".split(" "), "".split(" "), channelOptions);

          StackExchange.using("externalEditor", function() {
          // Have to fire editor after snippets, if snippets enabled
          if (StackExchange.settings.snippets.snippetsEnabled) {
          StackExchange.using("snippets", function() {
          createEditor();
          });
          }
          else {
          createEditor();
          }
          });

          function createEditor() {
          StackExchange.prepareEditor({
          heartbeatType: 'answer',
          autoActivateHeartbeat: false,
          convertImagesToLinks: true,
          noModals: true,
          showLowRepImageUploadWarning: true,
          reputationToPostImages: 10,
          bindNavPrevention: true,
          postfix: "",
          imageUploader: {
          brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
          contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
          allowUrls: true
          },
          onDemand: true,
          discardSelector: ".discard-answer"
          ,immediatelyShowMarkdownHelp:true
          });


          }
          });














          draft saved

          draft discarded


















          StackExchange.ready(
          function () {
          StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1127386%2fsmblist-and-findsmb-difference%23new-answer', 'question_page');
          }
          );

          Post as a guest















          Required, but never shown

























          0






          active

          oldest

          votes








          0






          active

          oldest

          votes









          active

          oldest

          votes






          active

          oldest

          votes
















          draft saved

          draft discarded




















































          Thanks for contributing an answer to Ask Ubuntu!


          • Please be sure to answer the question. Provide details and share your research!

          But avoid



          • Asking for help, clarification, or responding to other answers.

          • Making statements based on opinion; back them up with references or personal experience.


          To learn more, see our tips on writing great answers.




          draft saved


          draft discarded














          StackExchange.ready(
          function () {
          StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1127386%2fsmblist-and-findsmb-difference%23new-answer', 'question_page');
          }
          );

          Post as a guest















          Required, but never shown





















































          Required, but never shown














          Required, but never shown












          Required, but never shown







          Required, but never shown

































          Required, but never shown














          Required, but never shown












          Required, but never shown







          Required, but never shown







          Popular posts from this blog

          GameSpot

          日野市

          Tu-95轟炸機