Nvidia DVI/VGA problem
I have a Nvidia GT 630 with two LG Flatron E2242 screens connected. One of them is connected with a DVI/VGA connector because the card has 1 DVI and 1 VGA output.
The driver (got the latest one) can't query the one connected with the DVI/VGA connector for its EDID and I can't get it to work on a resolution bigger than 640x480.
How can I get it to work on 1920x1080 like the other one?
drivers nvidia xorg multiple-monitors resolution
bumped to the homepage by Community♦ 5 hours ago
This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
|
show 2 more comments
I have a Nvidia GT 630 with two LG Flatron E2242 screens connected. One of them is connected with a DVI/VGA connector because the card has 1 DVI and 1 VGA output.
The driver (got the latest one) can't query the one connected with the DVI/VGA connector for its EDID and I can't get it to work on a resolution bigger than 640x480.
How can I get it to work on 1920x1080 like the other one?
drivers nvidia xorg multiple-monitors resolution
bumped to the homepage by Community♦ 5 hours ago
This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
1
What drivers are you using? What version of Ubuntu? What other hardware is in the computer? Is it a desktop or laptop?
– ChrisR.
Mar 30 '14 at 20:15
It's a desktop. Ubuntu 12.04. I'm using the 334.16 drivers.
– 1CjaWfbSbARo
Apr 8 '14 at 20:13
I've got almost the same configuration, but I linked my screens with DVI + HDMI and it's working fine.
– MrVaykadji
Apr 8 '14 at 20:38
My screens only have VGA input
– 1CjaWfbSbARo
Apr 8 '14 at 20:46
Looking at the LG specs online for the monitor, I see 2 connections. DVI-D and VGA. Are you sure you have the correct model?
– Ghostwalker
Apr 9 '14 at 2:49
|
show 2 more comments
I have a Nvidia GT 630 with two LG Flatron E2242 screens connected. One of them is connected with a DVI/VGA connector because the card has 1 DVI and 1 VGA output.
The driver (got the latest one) can't query the one connected with the DVI/VGA connector for its EDID and I can't get it to work on a resolution bigger than 640x480.
How can I get it to work on 1920x1080 like the other one?
drivers nvidia xorg multiple-monitors resolution
I have a Nvidia GT 630 with two LG Flatron E2242 screens connected. One of them is connected with a DVI/VGA connector because the card has 1 DVI and 1 VGA output.
The driver (got the latest one) can't query the one connected with the DVI/VGA connector for its EDID and I can't get it to work on a resolution bigger than 640x480.
How can I get it to work on 1920x1080 like the other one?
drivers nvidia xorg multiple-monitors resolution
drivers nvidia xorg multiple-monitors resolution
asked Mar 30 '14 at 19:39
1CjaWfbSbARo1CjaWfbSbARo
1115
1115
bumped to the homepage by Community♦ 5 hours ago
This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
bumped to the homepage by Community♦ 5 hours ago
This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
1
What drivers are you using? What version of Ubuntu? What other hardware is in the computer? Is it a desktop or laptop?
– ChrisR.
Mar 30 '14 at 20:15
It's a desktop. Ubuntu 12.04. I'm using the 334.16 drivers.
– 1CjaWfbSbARo
Apr 8 '14 at 20:13
I've got almost the same configuration, but I linked my screens with DVI + HDMI and it's working fine.
– MrVaykadji
Apr 8 '14 at 20:38
My screens only have VGA input
– 1CjaWfbSbARo
Apr 8 '14 at 20:46
Looking at the LG specs online for the monitor, I see 2 connections. DVI-D and VGA. Are you sure you have the correct model?
– Ghostwalker
Apr 9 '14 at 2:49
|
show 2 more comments
1
What drivers are you using? What version of Ubuntu? What other hardware is in the computer? Is it a desktop or laptop?
– ChrisR.
Mar 30 '14 at 20:15
It's a desktop. Ubuntu 12.04. I'm using the 334.16 drivers.
– 1CjaWfbSbARo
Apr 8 '14 at 20:13
I've got almost the same configuration, but I linked my screens with DVI + HDMI and it's working fine.
– MrVaykadji
Apr 8 '14 at 20:38
My screens only have VGA input
– 1CjaWfbSbARo
Apr 8 '14 at 20:46
Looking at the LG specs online for the monitor, I see 2 connections. DVI-D and VGA. Are you sure you have the correct model?
– Ghostwalker
Apr 9 '14 at 2:49
1
1
What drivers are you using? What version of Ubuntu? What other hardware is in the computer? Is it a desktop or laptop?
– ChrisR.
Mar 30 '14 at 20:15
What drivers are you using? What version of Ubuntu? What other hardware is in the computer? Is it a desktop or laptop?
– ChrisR.
Mar 30 '14 at 20:15
It's a desktop. Ubuntu 12.04. I'm using the 334.16 drivers.
– 1CjaWfbSbARo
Apr 8 '14 at 20:13
It's a desktop. Ubuntu 12.04. I'm using the 334.16 drivers.
– 1CjaWfbSbARo
Apr 8 '14 at 20:13
I've got almost the same configuration, but I linked my screens with DVI + HDMI and it's working fine.
– MrVaykadji
Apr 8 '14 at 20:38
I've got almost the same configuration, but I linked my screens with DVI + HDMI and it's working fine.
– MrVaykadji
Apr 8 '14 at 20:38
My screens only have VGA input
– 1CjaWfbSbARo
Apr 8 '14 at 20:46
My screens only have VGA input
– 1CjaWfbSbARo
Apr 8 '14 at 20:46
Looking at the LG specs online for the monitor, I see 2 connections. DVI-D and VGA. Are you sure you have the correct model?
– Ghostwalker
Apr 9 '14 at 2:49
Looking at the LG specs online for the monitor, I see 2 connections. DVI-D and VGA. Are you sure you have the correct model?
– Ghostwalker
Apr 9 '14 at 2:49
|
show 2 more comments
2 Answers
2
active
oldest
votes
I experienced this problem with a SANSUI HDMI/PC tv/monitor. My issue resulted from the SANSUI incorrectly reporting it's EDID. The solution is to use xrandr to add a mode manually to the problematic device. If the mode you want to add to your output already exists you can skip steps 2 and 3
Type "xrandr" without any arguments which by default will list the devices and the modes currently associated with them. In my case xrandr reports the "output" device name for the SANSUI as CRT1.
Use "cvt" to create a mode line to work with. (60 is the refresh rate)
$ cvt 1920 1080 60
Modeline "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync
Add this as a new mode to the xrandr database
$ xrandr --newmode "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync
Associate the mode with the problematic output device
$ xrandr --addmode CRT1 "1920x1080_60.00"
We still need to select the new mode as the active mode for the output device
$ xrandr --output CRT1 --mode "1920x1080_60.00"
NOTE: If the modeline doesn't work as reported by cvt try leaving off the other parameters besides the dimensions and refresh rate when creating a new mode.
References:
- http://pkg-xorg.alioth.debian.org/howto/use-xrandr.html
- https://wiki.ubuntu.com/X/Config/Resolution#Dynamic_setup_with_xrandr
Ok, the faulty monitor is this one: DVI-I-0 connected 640x480+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 640x480 59.9*+ 320x240 60.1 When I try to add the mode, I get this. $ xrandr --addmode DVI-I-0 "1920x1080_60.00" X Error of failed request: BadMatch (invalid parameter attributes) Major opcode of failed request: 140 (RANDR) Minor opcode of failed request: 18 (RRAddOutputMode) Serial number of failed request: 31 Current serial number in output stream: 32
– 1CjaWfbSbARo
Apr 13 '14 at 21:56
add a comment |
The solution is about adding custom edid.bin monitor file to xorg.conf you can doing that by following this steps.
Before you do anything unplug DVI cable and plug the VGA cable so you can get the property edid file for your monitor. But if you don't have VGA cable then use windows for dumping the file.
first of all you have to install NVIDIA driver:
- download nvidia driver .run from http://www.geforce.com/drivers
- Hit CTRL+ALT+F1 then login
- type
sudo service lightdm stop
thensudo init 3
- uninstall any previously installed driver
- I'm not sure if it necessary but just in case
sudo apt-get dist-upgrade
- install driver by typing
sudo sh NVIDIA-Linu....run
and following farther instruction
reboot
- download nvidia driver .run from http://www.geforce.com/drivers
skip previously steps if you have installed nvidia driver
open NVIDIA X Server Settings, from DFP-0 section dump the EDID file by hitting Acquire EDID button and save it to Desktop, then save xorg.conf by hit save to X Configuration file (note that you have to be root to do that)
copy EDID file to /etc/X11/ by typing in terminal:
sudo cp /Desktop/filename.edid /etc/X11/filename.edid
then open xorg.conf
sudo gedit /etc/X11/xorg.conf
and add the following line to the Device Section:
Option "CustomEDID" "DFP-0:/etc/X11/filename.edid"
like this:
Section "Device"
Identifier "nVidia"
Driver "nvidia"
Option "CustomEDID" "DFP-0:/etc/X11/filename.edid"
EndSection
- Exit and save, then reboot. Now you can plug the DVI cable.
Thats all
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "89"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f441239%2fnvidia-dvi-vga-problem%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
I experienced this problem with a SANSUI HDMI/PC tv/monitor. My issue resulted from the SANSUI incorrectly reporting it's EDID. The solution is to use xrandr to add a mode manually to the problematic device. If the mode you want to add to your output already exists you can skip steps 2 and 3
Type "xrandr" without any arguments which by default will list the devices and the modes currently associated with them. In my case xrandr reports the "output" device name for the SANSUI as CRT1.
Use "cvt" to create a mode line to work with. (60 is the refresh rate)
$ cvt 1920 1080 60
Modeline "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync
Add this as a new mode to the xrandr database
$ xrandr --newmode "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync
Associate the mode with the problematic output device
$ xrandr --addmode CRT1 "1920x1080_60.00"
We still need to select the new mode as the active mode for the output device
$ xrandr --output CRT1 --mode "1920x1080_60.00"
NOTE: If the modeline doesn't work as reported by cvt try leaving off the other parameters besides the dimensions and refresh rate when creating a new mode.
References:
- http://pkg-xorg.alioth.debian.org/howto/use-xrandr.html
- https://wiki.ubuntu.com/X/Config/Resolution#Dynamic_setup_with_xrandr
Ok, the faulty monitor is this one: DVI-I-0 connected 640x480+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 640x480 59.9*+ 320x240 60.1 When I try to add the mode, I get this. $ xrandr --addmode DVI-I-0 "1920x1080_60.00" X Error of failed request: BadMatch (invalid parameter attributes) Major opcode of failed request: 140 (RANDR) Minor opcode of failed request: 18 (RRAddOutputMode) Serial number of failed request: 31 Current serial number in output stream: 32
– 1CjaWfbSbARo
Apr 13 '14 at 21:56
add a comment |
I experienced this problem with a SANSUI HDMI/PC tv/monitor. My issue resulted from the SANSUI incorrectly reporting it's EDID. The solution is to use xrandr to add a mode manually to the problematic device. If the mode you want to add to your output already exists you can skip steps 2 and 3
Type "xrandr" without any arguments which by default will list the devices and the modes currently associated with them. In my case xrandr reports the "output" device name for the SANSUI as CRT1.
Use "cvt" to create a mode line to work with. (60 is the refresh rate)
$ cvt 1920 1080 60
Modeline "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync
Add this as a new mode to the xrandr database
$ xrandr --newmode "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync
Associate the mode with the problematic output device
$ xrandr --addmode CRT1 "1920x1080_60.00"
We still need to select the new mode as the active mode for the output device
$ xrandr --output CRT1 --mode "1920x1080_60.00"
NOTE: If the modeline doesn't work as reported by cvt try leaving off the other parameters besides the dimensions and refresh rate when creating a new mode.
References:
- http://pkg-xorg.alioth.debian.org/howto/use-xrandr.html
- https://wiki.ubuntu.com/X/Config/Resolution#Dynamic_setup_with_xrandr
Ok, the faulty monitor is this one: DVI-I-0 connected 640x480+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 640x480 59.9*+ 320x240 60.1 When I try to add the mode, I get this. $ xrandr --addmode DVI-I-0 "1920x1080_60.00" X Error of failed request: BadMatch (invalid parameter attributes) Major opcode of failed request: 140 (RANDR) Minor opcode of failed request: 18 (RRAddOutputMode) Serial number of failed request: 31 Current serial number in output stream: 32
– 1CjaWfbSbARo
Apr 13 '14 at 21:56
add a comment |
I experienced this problem with a SANSUI HDMI/PC tv/monitor. My issue resulted from the SANSUI incorrectly reporting it's EDID. The solution is to use xrandr to add a mode manually to the problematic device. If the mode you want to add to your output already exists you can skip steps 2 and 3
Type "xrandr" without any arguments which by default will list the devices and the modes currently associated with them. In my case xrandr reports the "output" device name for the SANSUI as CRT1.
Use "cvt" to create a mode line to work with. (60 is the refresh rate)
$ cvt 1920 1080 60
Modeline "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync
Add this as a new mode to the xrandr database
$ xrandr --newmode "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync
Associate the mode with the problematic output device
$ xrandr --addmode CRT1 "1920x1080_60.00"
We still need to select the new mode as the active mode for the output device
$ xrandr --output CRT1 --mode "1920x1080_60.00"
NOTE: If the modeline doesn't work as reported by cvt try leaving off the other parameters besides the dimensions and refresh rate when creating a new mode.
References:
- http://pkg-xorg.alioth.debian.org/howto/use-xrandr.html
- https://wiki.ubuntu.com/X/Config/Resolution#Dynamic_setup_with_xrandr
I experienced this problem with a SANSUI HDMI/PC tv/monitor. My issue resulted from the SANSUI incorrectly reporting it's EDID. The solution is to use xrandr to add a mode manually to the problematic device. If the mode you want to add to your output already exists you can skip steps 2 and 3
Type "xrandr" without any arguments which by default will list the devices and the modes currently associated with them. In my case xrandr reports the "output" device name for the SANSUI as CRT1.
Use "cvt" to create a mode line to work with. (60 is the refresh rate)
$ cvt 1920 1080 60
Modeline "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync
Add this as a new mode to the xrandr database
$ xrandr --newmode "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync
Associate the mode with the problematic output device
$ xrandr --addmode CRT1 "1920x1080_60.00"
We still need to select the new mode as the active mode for the output device
$ xrandr --output CRT1 --mode "1920x1080_60.00"
NOTE: If the modeline doesn't work as reported by cvt try leaving off the other parameters besides the dimensions and refresh rate when creating a new mode.
References:
- http://pkg-xorg.alioth.debian.org/howto/use-xrandr.html
- https://wiki.ubuntu.com/X/Config/Resolution#Dynamic_setup_with_xrandr
answered Apr 9 '14 at 15:15
Lance CaraccioliLance Caraccioli
17316
17316
Ok, the faulty monitor is this one: DVI-I-0 connected 640x480+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 640x480 59.9*+ 320x240 60.1 When I try to add the mode, I get this. $ xrandr --addmode DVI-I-0 "1920x1080_60.00" X Error of failed request: BadMatch (invalid parameter attributes) Major opcode of failed request: 140 (RANDR) Minor opcode of failed request: 18 (RRAddOutputMode) Serial number of failed request: 31 Current serial number in output stream: 32
– 1CjaWfbSbARo
Apr 13 '14 at 21:56
add a comment |
Ok, the faulty monitor is this one: DVI-I-0 connected 640x480+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 640x480 59.9*+ 320x240 60.1 When I try to add the mode, I get this. $ xrandr --addmode DVI-I-0 "1920x1080_60.00" X Error of failed request: BadMatch (invalid parameter attributes) Major opcode of failed request: 140 (RANDR) Minor opcode of failed request: 18 (RRAddOutputMode) Serial number of failed request: 31 Current serial number in output stream: 32
– 1CjaWfbSbARo
Apr 13 '14 at 21:56
Ok, the faulty monitor is this one: DVI-I-0 connected 640x480+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 640x480 59.9*+ 320x240 60.1 When I try to add the mode, I get this. $ xrandr --addmode DVI-I-0 "1920x1080_60.00" X Error of failed request: BadMatch (invalid parameter attributes) Major opcode of failed request: 140 (RANDR) Minor opcode of failed request: 18 (RRAddOutputMode) Serial number of failed request: 31 Current serial number in output stream: 32
– 1CjaWfbSbARo
Apr 13 '14 at 21:56
Ok, the faulty monitor is this one: DVI-I-0 connected 640x480+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 640x480 59.9*+ 320x240 60.1 When I try to add the mode, I get this. $ xrandr --addmode DVI-I-0 "1920x1080_60.00" X Error of failed request: BadMatch (invalid parameter attributes) Major opcode of failed request: 140 (RANDR) Minor opcode of failed request: 18 (RRAddOutputMode) Serial number of failed request: 31 Current serial number in output stream: 32
– 1CjaWfbSbARo
Apr 13 '14 at 21:56
add a comment |
The solution is about adding custom edid.bin monitor file to xorg.conf you can doing that by following this steps.
Before you do anything unplug DVI cable and plug the VGA cable so you can get the property edid file for your monitor. But if you don't have VGA cable then use windows for dumping the file.
first of all you have to install NVIDIA driver:
- download nvidia driver .run from http://www.geforce.com/drivers
- Hit CTRL+ALT+F1 then login
- type
sudo service lightdm stop
thensudo init 3
- uninstall any previously installed driver
- I'm not sure if it necessary but just in case
sudo apt-get dist-upgrade
- install driver by typing
sudo sh NVIDIA-Linu....run
and following farther instruction
reboot
- download nvidia driver .run from http://www.geforce.com/drivers
skip previously steps if you have installed nvidia driver
open NVIDIA X Server Settings, from DFP-0 section dump the EDID file by hitting Acquire EDID button and save it to Desktop, then save xorg.conf by hit save to X Configuration file (note that you have to be root to do that)
copy EDID file to /etc/X11/ by typing in terminal:
sudo cp /Desktop/filename.edid /etc/X11/filename.edid
then open xorg.conf
sudo gedit /etc/X11/xorg.conf
and add the following line to the Device Section:
Option "CustomEDID" "DFP-0:/etc/X11/filename.edid"
like this:
Section "Device"
Identifier "nVidia"
Driver "nvidia"
Option "CustomEDID" "DFP-0:/etc/X11/filename.edid"
EndSection
- Exit and save, then reboot. Now you can plug the DVI cable.
Thats all
add a comment |
The solution is about adding custom edid.bin monitor file to xorg.conf you can doing that by following this steps.
Before you do anything unplug DVI cable and plug the VGA cable so you can get the property edid file for your monitor. But if you don't have VGA cable then use windows for dumping the file.
first of all you have to install NVIDIA driver:
- download nvidia driver .run from http://www.geforce.com/drivers
- Hit CTRL+ALT+F1 then login
- type
sudo service lightdm stop
thensudo init 3
- uninstall any previously installed driver
- I'm not sure if it necessary but just in case
sudo apt-get dist-upgrade
- install driver by typing
sudo sh NVIDIA-Linu....run
and following farther instruction
reboot
- download nvidia driver .run from http://www.geforce.com/drivers
skip previously steps if you have installed nvidia driver
open NVIDIA X Server Settings, from DFP-0 section dump the EDID file by hitting Acquire EDID button and save it to Desktop, then save xorg.conf by hit save to X Configuration file (note that you have to be root to do that)
copy EDID file to /etc/X11/ by typing in terminal:
sudo cp /Desktop/filename.edid /etc/X11/filename.edid
then open xorg.conf
sudo gedit /etc/X11/xorg.conf
and add the following line to the Device Section:
Option "CustomEDID" "DFP-0:/etc/X11/filename.edid"
like this:
Section "Device"
Identifier "nVidia"
Driver "nvidia"
Option "CustomEDID" "DFP-0:/etc/X11/filename.edid"
EndSection
- Exit and save, then reboot. Now you can plug the DVI cable.
Thats all
add a comment |
The solution is about adding custom edid.bin monitor file to xorg.conf you can doing that by following this steps.
Before you do anything unplug DVI cable and plug the VGA cable so you can get the property edid file for your monitor. But if you don't have VGA cable then use windows for dumping the file.
first of all you have to install NVIDIA driver:
- download nvidia driver .run from http://www.geforce.com/drivers
- Hit CTRL+ALT+F1 then login
- type
sudo service lightdm stop
thensudo init 3
- uninstall any previously installed driver
- I'm not sure if it necessary but just in case
sudo apt-get dist-upgrade
- install driver by typing
sudo sh NVIDIA-Linu....run
and following farther instruction
reboot
- download nvidia driver .run from http://www.geforce.com/drivers
skip previously steps if you have installed nvidia driver
open NVIDIA X Server Settings, from DFP-0 section dump the EDID file by hitting Acquire EDID button and save it to Desktop, then save xorg.conf by hit save to X Configuration file (note that you have to be root to do that)
copy EDID file to /etc/X11/ by typing in terminal:
sudo cp /Desktop/filename.edid /etc/X11/filename.edid
then open xorg.conf
sudo gedit /etc/X11/xorg.conf
and add the following line to the Device Section:
Option "CustomEDID" "DFP-0:/etc/X11/filename.edid"
like this:
Section "Device"
Identifier "nVidia"
Driver "nvidia"
Option "CustomEDID" "DFP-0:/etc/X11/filename.edid"
EndSection
- Exit and save, then reboot. Now you can plug the DVI cable.
Thats all
The solution is about adding custom edid.bin monitor file to xorg.conf you can doing that by following this steps.
Before you do anything unplug DVI cable and plug the VGA cable so you can get the property edid file for your monitor. But if you don't have VGA cable then use windows for dumping the file.
first of all you have to install NVIDIA driver:
- download nvidia driver .run from http://www.geforce.com/drivers
- Hit CTRL+ALT+F1 then login
- type
sudo service lightdm stop
thensudo init 3
- uninstall any previously installed driver
- I'm not sure if it necessary but just in case
sudo apt-get dist-upgrade
- install driver by typing
sudo sh NVIDIA-Linu....run
and following farther instruction
reboot
- download nvidia driver .run from http://www.geforce.com/drivers
skip previously steps if you have installed nvidia driver
open NVIDIA X Server Settings, from DFP-0 section dump the EDID file by hitting Acquire EDID button and save it to Desktop, then save xorg.conf by hit save to X Configuration file (note that you have to be root to do that)
copy EDID file to /etc/X11/ by typing in terminal:
sudo cp /Desktop/filename.edid /etc/X11/filename.edid
then open xorg.conf
sudo gedit /etc/X11/xorg.conf
and add the following line to the Device Section:
Option "CustomEDID" "DFP-0:/etc/X11/filename.edid"
like this:
Section "Device"
Identifier "nVidia"
Driver "nvidia"
Option "CustomEDID" "DFP-0:/etc/X11/filename.edid"
EndSection
- Exit and save, then reboot. Now you can plug the DVI cable.
Thats all
edited Jun 3 '15 at 9:22
answered Jun 3 '15 at 1:01
AL3ARRABAL3ARRAB
11
11
add a comment |
add a comment |
Thanks for contributing an answer to Ask Ubuntu!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f441239%2fnvidia-dvi-vga-problem%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
1
What drivers are you using? What version of Ubuntu? What other hardware is in the computer? Is it a desktop or laptop?
– ChrisR.
Mar 30 '14 at 20:15
It's a desktop. Ubuntu 12.04. I'm using the 334.16 drivers.
– 1CjaWfbSbARo
Apr 8 '14 at 20:13
I've got almost the same configuration, but I linked my screens with DVI + HDMI and it's working fine.
– MrVaykadji
Apr 8 '14 at 20:38
My screens only have VGA input
– 1CjaWfbSbARo
Apr 8 '14 at 20:46
Looking at the LG specs online for the monitor, I see 2 connections. DVI-D and VGA. Are you sure you have the correct model?
– Ghostwalker
Apr 9 '14 at 2:49