What in Lubuntu would cause monitor to alternate Analog/Digital and stay in black screen?












0















18 September 2018 original post



I just installed latest stable version of Lubuntu from USB. Tested it first running off the USB and the interface worked but after I installed and restarted as it requested, it defaults to starting Lubuntu and I see the loading screen but then the entire screen goes black except for the upper left corner (I think display built into monitor itself) alternating Analog / Digital rapidly. I cant do anything via the keyboard so eventually I just shut it down manually.



I tried logging into Lubuntus equivalent of Safe Mode but it just spontaeously shut off. I'm not sure if it's due to overheating? I figured since Lubuntu used minimal RAM this wouldn't be a risk merely for starting it up. Vista's safe mode didn't seem to cause that and I know it was more resource intensive.





20 March 2019 reply to DK bose



per your instructions



jay@KingdomClubs:~$ inxi -Fxxxz
System: Host: KingdomClubs Kernel: 4.15.0-43-generic i686
bits: 32 gcc: 7.3.0
Desktop: LXDE (Openbox 3.6.1) info: lxpanel dm: lightdm
Distro: Ubuntu 18.04.1 LTS
Machine: Device: desktop System: HP-Pavilion product: GC674AA-ABA m8120n serial: N/A
Mobo: ASUSTek model: Basswood3G v: 1.05 serial: N/A
BIOS: Phoenix v: 5.07 date: 05/24/2007
Chassis: Hewlett-Packard type: 3 v: 1111 serial: N/A
CPU: Quad core Intel Core2 Quad (-MCP-)
arch: Conroe rev.7 cache: 4096 KB
flags: (lm nx pae sse sse2 sse3 ssse3 vmx) bmips: 19199
clock speeds: min/max: 1600/2400 MHz 1: 1599 MHz 2: 1601 MHz
3: 1599 MHz 4: 1599 MHz
Graphics: Card: NVIDIA G72 [GeForce 7350 LE]
bus-ID: 01:00.0 chip-ID: 10de:01d0
Display Server: x11 (X.Org 1.19.6 )
drivers: vesa,nouveau (unloaded: modesetting,fbdev)
Resolution: 1280x1024@0.00hz
OpenGL: renderer: llvmpipe (LLVM 6.0, 128 bits)
version: 3.3 Mesa 18.0.5 (compat-v: 3.0) Direct Render: Yes
Audio: Card Intel 82801H (ICH8 Family) HD Audio Controller
driver: snd_hda_intel bus-ID: 00:1b.0 chip-ID: 8086:284b
Sound: Advanced Linux Sound Architecture v: k4.15.0-43-generic
Network: Card-1: Intel 82566DC Gigabit Network Connection
driver: e1000e v: 3.2.6-k port: ff00
bus-ID: 00:19.0 chip-ID: 8086:104b
IF: enp0s25 state: down mac: <filter>
Card-2: Gemtek WUBR-177G [Ralink RT2571W]
driver: rt73usb v: 2.3.0 usb-ID: 002-002 chip-ID: 15a9:0004
IF: wlx00c0a8eacdd5 state: N/A speed: N/A duplex: N/A mac: N/A
Drives: HDD Total Size: 640.1GB (51.3% used)
ID-1: /dev/sda model: Hitachi_HDT72503 size: 320.1GB
serial: <filter>
ID-2: /dev/sdb model: Hitachi_HDT72503 size: 320.1GB
serial: <filter>
Partition: ID-1: / size: 292G used: 11G (4%) fs: ext4 dev: /dev/dm-0
ID-2: swap-1 size: 1.03GB used: 0.00GB (0%)
fs: swap dev: /dev/dm-1
RAID: System: supported: N/A
No RAID devices: /proc/mdstat, md_mod kernel module present
Unused Devices: none
Sensors: System Temperatures: cpu: 70.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 189 Uptime: 9 min Memory: 578.3/3024.7MB
Init: systemd v: 237 runlevel: 5 Gcc sys: N/A
Client: Shell (bash 4.4.191 running in x-terminal-emul) inxi: 2.3.56
jay@KingdomClubs:~$


Does this help? I'm not sure if it helps ID the problem










share|improve this question

























  • At some point, you could share details of the machine you're using. If you can install software, install inxi and post the output of inxi -Fxxxz here.

    – DK Bose
    Sep 23 '18 at 0:12











  • DK Bose I installed inxi and added the output above.

    – VistaRefugee
    23 mins ago
















0















18 September 2018 original post



I just installed latest stable version of Lubuntu from USB. Tested it first running off the USB and the interface worked but after I installed and restarted as it requested, it defaults to starting Lubuntu and I see the loading screen but then the entire screen goes black except for the upper left corner (I think display built into monitor itself) alternating Analog / Digital rapidly. I cant do anything via the keyboard so eventually I just shut it down manually.



I tried logging into Lubuntus equivalent of Safe Mode but it just spontaeously shut off. I'm not sure if it's due to overheating? I figured since Lubuntu used minimal RAM this wouldn't be a risk merely for starting it up. Vista's safe mode didn't seem to cause that and I know it was more resource intensive.





20 March 2019 reply to DK bose



per your instructions



jay@KingdomClubs:~$ inxi -Fxxxz
System: Host: KingdomClubs Kernel: 4.15.0-43-generic i686
bits: 32 gcc: 7.3.0
Desktop: LXDE (Openbox 3.6.1) info: lxpanel dm: lightdm
Distro: Ubuntu 18.04.1 LTS
Machine: Device: desktop System: HP-Pavilion product: GC674AA-ABA m8120n serial: N/A
Mobo: ASUSTek model: Basswood3G v: 1.05 serial: N/A
BIOS: Phoenix v: 5.07 date: 05/24/2007
Chassis: Hewlett-Packard type: 3 v: 1111 serial: N/A
CPU: Quad core Intel Core2 Quad (-MCP-)
arch: Conroe rev.7 cache: 4096 KB
flags: (lm nx pae sse sse2 sse3 ssse3 vmx) bmips: 19199
clock speeds: min/max: 1600/2400 MHz 1: 1599 MHz 2: 1601 MHz
3: 1599 MHz 4: 1599 MHz
Graphics: Card: NVIDIA G72 [GeForce 7350 LE]
bus-ID: 01:00.0 chip-ID: 10de:01d0
Display Server: x11 (X.Org 1.19.6 )
drivers: vesa,nouveau (unloaded: modesetting,fbdev)
Resolution: 1280x1024@0.00hz
OpenGL: renderer: llvmpipe (LLVM 6.0, 128 bits)
version: 3.3 Mesa 18.0.5 (compat-v: 3.0) Direct Render: Yes
Audio: Card Intel 82801H (ICH8 Family) HD Audio Controller
driver: snd_hda_intel bus-ID: 00:1b.0 chip-ID: 8086:284b
Sound: Advanced Linux Sound Architecture v: k4.15.0-43-generic
Network: Card-1: Intel 82566DC Gigabit Network Connection
driver: e1000e v: 3.2.6-k port: ff00
bus-ID: 00:19.0 chip-ID: 8086:104b
IF: enp0s25 state: down mac: <filter>
Card-2: Gemtek WUBR-177G [Ralink RT2571W]
driver: rt73usb v: 2.3.0 usb-ID: 002-002 chip-ID: 15a9:0004
IF: wlx00c0a8eacdd5 state: N/A speed: N/A duplex: N/A mac: N/A
Drives: HDD Total Size: 640.1GB (51.3% used)
ID-1: /dev/sda model: Hitachi_HDT72503 size: 320.1GB
serial: <filter>
ID-2: /dev/sdb model: Hitachi_HDT72503 size: 320.1GB
serial: <filter>
Partition: ID-1: / size: 292G used: 11G (4%) fs: ext4 dev: /dev/dm-0
ID-2: swap-1 size: 1.03GB used: 0.00GB (0%)
fs: swap dev: /dev/dm-1
RAID: System: supported: N/A
No RAID devices: /proc/mdstat, md_mod kernel module present
Unused Devices: none
Sensors: System Temperatures: cpu: 70.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 189 Uptime: 9 min Memory: 578.3/3024.7MB
Init: systemd v: 237 runlevel: 5 Gcc sys: N/A
Client: Shell (bash 4.4.191 running in x-terminal-emul) inxi: 2.3.56
jay@KingdomClubs:~$


Does this help? I'm not sure if it helps ID the problem










share|improve this question

























  • At some point, you could share details of the machine you're using. If you can install software, install inxi and post the output of inxi -Fxxxz here.

    – DK Bose
    Sep 23 '18 at 0:12











  • DK Bose I installed inxi and added the output above.

    – VistaRefugee
    23 mins ago














0












0








0








18 September 2018 original post



I just installed latest stable version of Lubuntu from USB. Tested it first running off the USB and the interface worked but after I installed and restarted as it requested, it defaults to starting Lubuntu and I see the loading screen but then the entire screen goes black except for the upper left corner (I think display built into monitor itself) alternating Analog / Digital rapidly. I cant do anything via the keyboard so eventually I just shut it down manually.



I tried logging into Lubuntus equivalent of Safe Mode but it just spontaeously shut off. I'm not sure if it's due to overheating? I figured since Lubuntu used minimal RAM this wouldn't be a risk merely for starting it up. Vista's safe mode didn't seem to cause that and I know it was more resource intensive.





20 March 2019 reply to DK bose



per your instructions



jay@KingdomClubs:~$ inxi -Fxxxz
System: Host: KingdomClubs Kernel: 4.15.0-43-generic i686
bits: 32 gcc: 7.3.0
Desktop: LXDE (Openbox 3.6.1) info: lxpanel dm: lightdm
Distro: Ubuntu 18.04.1 LTS
Machine: Device: desktop System: HP-Pavilion product: GC674AA-ABA m8120n serial: N/A
Mobo: ASUSTek model: Basswood3G v: 1.05 serial: N/A
BIOS: Phoenix v: 5.07 date: 05/24/2007
Chassis: Hewlett-Packard type: 3 v: 1111 serial: N/A
CPU: Quad core Intel Core2 Quad (-MCP-)
arch: Conroe rev.7 cache: 4096 KB
flags: (lm nx pae sse sse2 sse3 ssse3 vmx) bmips: 19199
clock speeds: min/max: 1600/2400 MHz 1: 1599 MHz 2: 1601 MHz
3: 1599 MHz 4: 1599 MHz
Graphics: Card: NVIDIA G72 [GeForce 7350 LE]
bus-ID: 01:00.0 chip-ID: 10de:01d0
Display Server: x11 (X.Org 1.19.6 )
drivers: vesa,nouveau (unloaded: modesetting,fbdev)
Resolution: 1280x1024@0.00hz
OpenGL: renderer: llvmpipe (LLVM 6.0, 128 bits)
version: 3.3 Mesa 18.0.5 (compat-v: 3.0) Direct Render: Yes
Audio: Card Intel 82801H (ICH8 Family) HD Audio Controller
driver: snd_hda_intel bus-ID: 00:1b.0 chip-ID: 8086:284b
Sound: Advanced Linux Sound Architecture v: k4.15.0-43-generic
Network: Card-1: Intel 82566DC Gigabit Network Connection
driver: e1000e v: 3.2.6-k port: ff00
bus-ID: 00:19.0 chip-ID: 8086:104b
IF: enp0s25 state: down mac: <filter>
Card-2: Gemtek WUBR-177G [Ralink RT2571W]
driver: rt73usb v: 2.3.0 usb-ID: 002-002 chip-ID: 15a9:0004
IF: wlx00c0a8eacdd5 state: N/A speed: N/A duplex: N/A mac: N/A
Drives: HDD Total Size: 640.1GB (51.3% used)
ID-1: /dev/sda model: Hitachi_HDT72503 size: 320.1GB
serial: <filter>
ID-2: /dev/sdb model: Hitachi_HDT72503 size: 320.1GB
serial: <filter>
Partition: ID-1: / size: 292G used: 11G (4%) fs: ext4 dev: /dev/dm-0
ID-2: swap-1 size: 1.03GB used: 0.00GB (0%)
fs: swap dev: /dev/dm-1
RAID: System: supported: N/A
No RAID devices: /proc/mdstat, md_mod kernel module present
Unused Devices: none
Sensors: System Temperatures: cpu: 70.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 189 Uptime: 9 min Memory: 578.3/3024.7MB
Init: systemd v: 237 runlevel: 5 Gcc sys: N/A
Client: Shell (bash 4.4.191 running in x-terminal-emul) inxi: 2.3.56
jay@KingdomClubs:~$


Does this help? I'm not sure if it helps ID the problem










share|improve this question
















18 September 2018 original post



I just installed latest stable version of Lubuntu from USB. Tested it first running off the USB and the interface worked but after I installed and restarted as it requested, it defaults to starting Lubuntu and I see the loading screen but then the entire screen goes black except for the upper left corner (I think display built into monitor itself) alternating Analog / Digital rapidly. I cant do anything via the keyboard so eventually I just shut it down manually.



I tried logging into Lubuntus equivalent of Safe Mode but it just spontaeously shut off. I'm not sure if it's due to overheating? I figured since Lubuntu used minimal RAM this wouldn't be a risk merely for starting it up. Vista's safe mode didn't seem to cause that and I know it was more resource intensive.





20 March 2019 reply to DK bose



per your instructions



jay@KingdomClubs:~$ inxi -Fxxxz
System: Host: KingdomClubs Kernel: 4.15.0-43-generic i686
bits: 32 gcc: 7.3.0
Desktop: LXDE (Openbox 3.6.1) info: lxpanel dm: lightdm
Distro: Ubuntu 18.04.1 LTS
Machine: Device: desktop System: HP-Pavilion product: GC674AA-ABA m8120n serial: N/A
Mobo: ASUSTek model: Basswood3G v: 1.05 serial: N/A
BIOS: Phoenix v: 5.07 date: 05/24/2007
Chassis: Hewlett-Packard type: 3 v: 1111 serial: N/A
CPU: Quad core Intel Core2 Quad (-MCP-)
arch: Conroe rev.7 cache: 4096 KB
flags: (lm nx pae sse sse2 sse3 ssse3 vmx) bmips: 19199
clock speeds: min/max: 1600/2400 MHz 1: 1599 MHz 2: 1601 MHz
3: 1599 MHz 4: 1599 MHz
Graphics: Card: NVIDIA G72 [GeForce 7350 LE]
bus-ID: 01:00.0 chip-ID: 10de:01d0
Display Server: x11 (X.Org 1.19.6 )
drivers: vesa,nouveau (unloaded: modesetting,fbdev)
Resolution: 1280x1024@0.00hz
OpenGL: renderer: llvmpipe (LLVM 6.0, 128 bits)
version: 3.3 Mesa 18.0.5 (compat-v: 3.0) Direct Render: Yes
Audio: Card Intel 82801H (ICH8 Family) HD Audio Controller
driver: snd_hda_intel bus-ID: 00:1b.0 chip-ID: 8086:284b
Sound: Advanced Linux Sound Architecture v: k4.15.0-43-generic
Network: Card-1: Intel 82566DC Gigabit Network Connection
driver: e1000e v: 3.2.6-k port: ff00
bus-ID: 00:19.0 chip-ID: 8086:104b
IF: enp0s25 state: down mac: <filter>
Card-2: Gemtek WUBR-177G [Ralink RT2571W]
driver: rt73usb v: 2.3.0 usb-ID: 002-002 chip-ID: 15a9:0004
IF: wlx00c0a8eacdd5 state: N/A speed: N/A duplex: N/A mac: N/A
Drives: HDD Total Size: 640.1GB (51.3% used)
ID-1: /dev/sda model: Hitachi_HDT72503 size: 320.1GB
serial: <filter>
ID-2: /dev/sdb model: Hitachi_HDT72503 size: 320.1GB
serial: <filter>
Partition: ID-1: / size: 292G used: 11G (4%) fs: ext4 dev: /dev/dm-0
ID-2: swap-1 size: 1.03GB used: 0.00GB (0%)
fs: swap dev: /dev/dm-1
RAID: System: supported: N/A
No RAID devices: /proc/mdstat, md_mod kernel module present
Unused Devices: none
Sensors: System Temperatures: cpu: 70.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 189 Uptime: 9 min Memory: 578.3/3024.7MB
Init: systemd v: 237 runlevel: 5 Gcc sys: N/A
Client: Shell (bash 4.4.191 running in x-terminal-emul) inxi: 2.3.56
jay@KingdomClubs:~$


Does this help? I'm not sure if it helps ID the problem







lubuntu display startup monitor






share|improve this question















share|improve this question













share|improve this question




share|improve this question








edited 27 mins ago







VistaRefugee

















asked Sep 18 '18 at 5:06









VistaRefugeeVistaRefugee

186




186













  • At some point, you could share details of the machine you're using. If you can install software, install inxi and post the output of inxi -Fxxxz here.

    – DK Bose
    Sep 23 '18 at 0:12











  • DK Bose I installed inxi and added the output above.

    – VistaRefugee
    23 mins ago



















  • At some point, you could share details of the machine you're using. If you can install software, install inxi and post the output of inxi -Fxxxz here.

    – DK Bose
    Sep 23 '18 at 0:12











  • DK Bose I installed inxi and added the output above.

    – VistaRefugee
    23 mins ago

















At some point, you could share details of the machine you're using. If you can install software, install inxi and post the output of inxi -Fxxxz here.

– DK Bose
Sep 23 '18 at 0:12





At some point, you could share details of the machine you're using. If you can install software, install inxi and post the output of inxi -Fxxxz here.

– DK Bose
Sep 23 '18 at 0:12













DK Bose I installed inxi and added the output above.

– VistaRefugee
23 mins ago





DK Bose I installed inxi and added the output above.

– VistaRefugee
23 mins ago










0






active

oldest

votes











Your Answer








StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "89"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);

StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});

function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});


}
});














draft saved

draft discarded


















StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1076206%2fwhat-in-lubuntu-would-cause-monitor-to-alternate-analog-digital-and-stay-in-blac%23new-answer', 'question_page');
}
);

Post as a guest















Required, but never shown

























0






active

oldest

votes








0






active

oldest

votes









active

oldest

votes






active

oldest

votes
















draft saved

draft discarded




















































Thanks for contributing an answer to Ask Ubuntu!


  • Please be sure to answer the question. Provide details and share your research!

But avoid



  • Asking for help, clarification, or responding to other answers.

  • Making statements based on opinion; back them up with references or personal experience.


To learn more, see our tips on writing great answers.




draft saved


draft discarded














StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1076206%2fwhat-in-lubuntu-would-cause-monitor-to-alternate-analog-digital-and-stay-in-blac%23new-answer', 'question_page');
}
);

Post as a guest















Required, but never shown





















































Required, but never shown














Required, but never shown












Required, but never shown







Required, but never shown

































Required, but never shown














Required, but never shown












Required, but never shown







Required, but never shown







Popular posts from this blog

GameSpot

日野市

Tu-95轟炸機