Cannot mount usb hard drive





.everyoneloves__top-leaderboard:empty,.everyoneloves__mid-leaderboard:empty,.everyoneloves__bot-mid-leaderboard:empty{ margin-bottom:0;
}







3















I'm using Ubuntu 18.04 and I am trying to mount a usb hard drive.



The fdisk output:



Disk /dev/sdb: 465.8 GiB, 500107837440 bytes, 976773120 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 1048576 bytes
Disklabel type: dos
Disk identifier: 0x003a4817

Device Boot Start End Sectors Size Id Type
/dev/sdb1 * 2048 976773119 976771072 465.8G 7 HPFS/NTFS/exFAT


I have installed exfat-fuse and exfat-utils. When I try to mount, I get the following message:



 $ sudo mount /dev/sdb /media/usb-drive
mount: /media/usb-drive: wrong fs type, bad option, bad superblock on /dev/sdb, missing codepage or helper program, or other error.


If I specify exfat in particular



 $ sudo mount /dev/sdb /media/usb-drive -t exfat
FUSE exfat 1.2.8
ERROR: exFAT file system is not found.


Is the filesystem not exFAT?



Moreover, when I try to look at it in gparted:



mount error in gparted



I am not sure what is going on. Any help would be appreciated.










share|improve this question

















This question has an open bounty worth +50
reputation from basil ending in 4 days.


Looking for an answer drawing from credible and/or official sources.

















  • You are trying to mount /dev/sdb, that is wrong. You need ot mount /dev/sdb1.

    – Pilot6
    Mar 12 at 21:59











  • And I don't think it's exfat. Most likely it's ntfs.

    – Pilot6
    Mar 12 at 22:00











  • I get the same message either way. Says "ntfs signature is missing"

    – basil
    Mar 12 at 22:37











  • Boot into Windows, or connect the drive to a Windows machine, and try and run chkdsk on the drive. Do NOT run ntfsfix in Ubuntu on it.

    – heynnema
    Mar 12 at 23:47






  • 1





    Not if it's ntfs. Since you supplied such little information... it's difficult to make other recommendations. What was on the drive? Where was it used? Did it mount in Ubuntu before? Do you have backups of what used to be on the drive?

    – heynnema
    Mar 13 at 19:47


















3















I'm using Ubuntu 18.04 and I am trying to mount a usb hard drive.



The fdisk output:



Disk /dev/sdb: 465.8 GiB, 500107837440 bytes, 976773120 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 1048576 bytes
Disklabel type: dos
Disk identifier: 0x003a4817

Device Boot Start End Sectors Size Id Type
/dev/sdb1 * 2048 976773119 976771072 465.8G 7 HPFS/NTFS/exFAT


I have installed exfat-fuse and exfat-utils. When I try to mount, I get the following message:



 $ sudo mount /dev/sdb /media/usb-drive
mount: /media/usb-drive: wrong fs type, bad option, bad superblock on /dev/sdb, missing codepage or helper program, or other error.


If I specify exfat in particular



 $ sudo mount /dev/sdb /media/usb-drive -t exfat
FUSE exfat 1.2.8
ERROR: exFAT file system is not found.


Is the filesystem not exFAT?



Moreover, when I try to look at it in gparted:



mount error in gparted



I am not sure what is going on. Any help would be appreciated.










share|improve this question

















This question has an open bounty worth +50
reputation from basil ending in 4 days.


Looking for an answer drawing from credible and/or official sources.

















  • You are trying to mount /dev/sdb, that is wrong. You need ot mount /dev/sdb1.

    – Pilot6
    Mar 12 at 21:59











  • And I don't think it's exfat. Most likely it's ntfs.

    – Pilot6
    Mar 12 at 22:00











  • I get the same message either way. Says "ntfs signature is missing"

    – basil
    Mar 12 at 22:37











  • Boot into Windows, or connect the drive to a Windows machine, and try and run chkdsk on the drive. Do NOT run ntfsfix in Ubuntu on it.

    – heynnema
    Mar 12 at 23:47






  • 1





    Not if it's ntfs. Since you supplied such little information... it's difficult to make other recommendations. What was on the drive? Where was it used? Did it mount in Ubuntu before? Do you have backups of what used to be on the drive?

    – heynnema
    Mar 13 at 19:47














3












3








3








I'm using Ubuntu 18.04 and I am trying to mount a usb hard drive.



The fdisk output:



Disk /dev/sdb: 465.8 GiB, 500107837440 bytes, 976773120 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 1048576 bytes
Disklabel type: dos
Disk identifier: 0x003a4817

Device Boot Start End Sectors Size Id Type
/dev/sdb1 * 2048 976773119 976771072 465.8G 7 HPFS/NTFS/exFAT


I have installed exfat-fuse and exfat-utils. When I try to mount, I get the following message:



 $ sudo mount /dev/sdb /media/usb-drive
mount: /media/usb-drive: wrong fs type, bad option, bad superblock on /dev/sdb, missing codepage or helper program, or other error.


If I specify exfat in particular



 $ sudo mount /dev/sdb /media/usb-drive -t exfat
FUSE exfat 1.2.8
ERROR: exFAT file system is not found.


Is the filesystem not exFAT?



Moreover, when I try to look at it in gparted:



mount error in gparted



I am not sure what is going on. Any help would be appreciated.










share|improve this question
















I'm using Ubuntu 18.04 and I am trying to mount a usb hard drive.



The fdisk output:



Disk /dev/sdb: 465.8 GiB, 500107837440 bytes, 976773120 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 1048576 bytes
Disklabel type: dos
Disk identifier: 0x003a4817

Device Boot Start End Sectors Size Id Type
/dev/sdb1 * 2048 976773119 976771072 465.8G 7 HPFS/NTFS/exFAT


I have installed exfat-fuse and exfat-utils. When I try to mount, I get the following message:



 $ sudo mount /dev/sdb /media/usb-drive
mount: /media/usb-drive: wrong fs type, bad option, bad superblock on /dev/sdb, missing codepage or helper program, or other error.


If I specify exfat in particular



 $ sudo mount /dev/sdb /media/usb-drive -t exfat
FUSE exfat 1.2.8
ERROR: exFAT file system is not found.


Is the filesystem not exFAT?



Moreover, when I try to look at it in gparted:



mount error in gparted



I am not sure what is going on. Any help would be appreciated.







18.04 mount gparted exfat






share|improve this question















share|improve this question













share|improve this question




share|improve this question








edited 2 days ago









Philippe Delteil

6361522




6361522










asked Mar 12 at 21:51









basilbasil

93119




93119






This question has an open bounty worth +50
reputation from basil ending in 4 days.


Looking for an answer drawing from credible and/or official sources.








This question has an open bounty worth +50
reputation from basil ending in 4 days.


Looking for an answer drawing from credible and/or official sources.















  • You are trying to mount /dev/sdb, that is wrong. You need ot mount /dev/sdb1.

    – Pilot6
    Mar 12 at 21:59











  • And I don't think it's exfat. Most likely it's ntfs.

    – Pilot6
    Mar 12 at 22:00











  • I get the same message either way. Says "ntfs signature is missing"

    – basil
    Mar 12 at 22:37











  • Boot into Windows, or connect the drive to a Windows machine, and try and run chkdsk on the drive. Do NOT run ntfsfix in Ubuntu on it.

    – heynnema
    Mar 12 at 23:47






  • 1





    Not if it's ntfs. Since you supplied such little information... it's difficult to make other recommendations. What was on the drive? Where was it used? Did it mount in Ubuntu before? Do you have backups of what used to be on the drive?

    – heynnema
    Mar 13 at 19:47



















  • You are trying to mount /dev/sdb, that is wrong. You need ot mount /dev/sdb1.

    – Pilot6
    Mar 12 at 21:59











  • And I don't think it's exfat. Most likely it's ntfs.

    – Pilot6
    Mar 12 at 22:00











  • I get the same message either way. Says "ntfs signature is missing"

    – basil
    Mar 12 at 22:37











  • Boot into Windows, or connect the drive to a Windows machine, and try and run chkdsk on the drive. Do NOT run ntfsfix in Ubuntu on it.

    – heynnema
    Mar 12 at 23:47






  • 1





    Not if it's ntfs. Since you supplied such little information... it's difficult to make other recommendations. What was on the drive? Where was it used? Did it mount in Ubuntu before? Do you have backups of what used to be on the drive?

    – heynnema
    Mar 13 at 19:47

















You are trying to mount /dev/sdb, that is wrong. You need ot mount /dev/sdb1.

– Pilot6
Mar 12 at 21:59





You are trying to mount /dev/sdb, that is wrong. You need ot mount /dev/sdb1.

– Pilot6
Mar 12 at 21:59













And I don't think it's exfat. Most likely it's ntfs.

– Pilot6
Mar 12 at 22:00





And I don't think it's exfat. Most likely it's ntfs.

– Pilot6
Mar 12 at 22:00













I get the same message either way. Says "ntfs signature is missing"

– basil
Mar 12 at 22:37





I get the same message either way. Says "ntfs signature is missing"

– basil
Mar 12 at 22:37













Boot into Windows, or connect the drive to a Windows machine, and try and run chkdsk on the drive. Do NOT run ntfsfix in Ubuntu on it.

– heynnema
Mar 12 at 23:47





Boot into Windows, or connect the drive to a Windows machine, and try and run chkdsk on the drive. Do NOT run ntfsfix in Ubuntu on it.

– heynnema
Mar 12 at 23:47




1




1





Not if it's ntfs. Since you supplied such little information... it's difficult to make other recommendations. What was on the drive? Where was it used? Did it mount in Ubuntu before? Do you have backups of what used to be on the drive?

– heynnema
Mar 13 at 19:47





Not if it's ntfs. Since you supplied such little information... it's difficult to make other recommendations. What was on the drive? Where was it used? Did it mount in Ubuntu before? Do you have backups of what used to be on the drive?

– heynnema
Mar 13 at 19:47










1 Answer
1






active

oldest

votes


















1














Firstly, an easier way of mounting is to use:



mount -t auto /dev/sdb /media/usb-drive


This way you are spared the magical incantations of specifying a partition type.



Secondly, you may have errors on the drive and/or the partition table may be damaged. This happened to me when using dd to erase the first MB of a USB on /dev/sdd and I accidentally used /dev/sdb. This wiped out the first 1 MB of my second hard disk containing the MBR (Master Boot Record) and partition table.



TestDisk can be downloaded here and has versions for Windows and Linux. It goes through every byte of your hard drive to analyze what partition type it is and rebuilds the partition tables. I used TestDisk to successfully recover all my data.



From the website, TestDisk can:




  • Fix partition table, recover deleted partition

  • Recover FAT32 boot sector from its backup

  • Rebuild FAT12/FAT16/FAT32 boot sector

  • Fix FAT tables

  • Rebuild NTFS boot sector

  • Recover NTFS boot sector from its backup

  • Fix MFT using MFT mirror

  • Locate ext2/ext3/ext4 Backup SuperBlock

  • Undelete files from FAT, exFAT, NTFS and ext2 filesystem

  • Copy files from deleted FAT, exFAT, NTFS and ext2/ext3/ext4 partitions.






share|improve this answer


























    Your Answer








    StackExchange.ready(function() {
    var channelOptions = {
    tags: "".split(" "),
    id: "89"
    };
    initTagRenderer("".split(" "), "".split(" "), channelOptions);

    StackExchange.using("externalEditor", function() {
    // Have to fire editor after snippets, if snippets enabled
    if (StackExchange.settings.snippets.snippetsEnabled) {
    StackExchange.using("snippets", function() {
    createEditor();
    });
    }
    else {
    createEditor();
    }
    });

    function createEditor() {
    StackExchange.prepareEditor({
    heartbeatType: 'answer',
    autoActivateHeartbeat: false,
    convertImagesToLinks: true,
    noModals: true,
    showLowRepImageUploadWarning: true,
    reputationToPostImages: 10,
    bindNavPrevention: true,
    postfix: "",
    imageUploader: {
    brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
    contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
    allowUrls: true
    },
    onDemand: true,
    discardSelector: ".discard-answer"
    ,immediatelyShowMarkdownHelp:true
    });


    }
    });














    draft saved

    draft discarded


















    StackExchange.ready(
    function () {
    StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1125158%2fcannot-mount-usb-hard-drive%23new-answer', 'question_page');
    }
    );

    Post as a guest















    Required, but never shown

























    1 Answer
    1






    active

    oldest

    votes








    1 Answer
    1






    active

    oldest

    votes









    active

    oldest

    votes






    active

    oldest

    votes









    1














    Firstly, an easier way of mounting is to use:



    mount -t auto /dev/sdb /media/usb-drive


    This way you are spared the magical incantations of specifying a partition type.



    Secondly, you may have errors on the drive and/or the partition table may be damaged. This happened to me when using dd to erase the first MB of a USB on /dev/sdd and I accidentally used /dev/sdb. This wiped out the first 1 MB of my second hard disk containing the MBR (Master Boot Record) and partition table.



    TestDisk can be downloaded here and has versions for Windows and Linux. It goes through every byte of your hard drive to analyze what partition type it is and rebuilds the partition tables. I used TestDisk to successfully recover all my data.



    From the website, TestDisk can:




    • Fix partition table, recover deleted partition

    • Recover FAT32 boot sector from its backup

    • Rebuild FAT12/FAT16/FAT32 boot sector

    • Fix FAT tables

    • Rebuild NTFS boot sector

    • Recover NTFS boot sector from its backup

    • Fix MFT using MFT mirror

    • Locate ext2/ext3/ext4 Backup SuperBlock

    • Undelete files from FAT, exFAT, NTFS and ext2 filesystem

    • Copy files from deleted FAT, exFAT, NTFS and ext2/ext3/ext4 partitions.






    share|improve this answer






























      1














      Firstly, an easier way of mounting is to use:



      mount -t auto /dev/sdb /media/usb-drive


      This way you are spared the magical incantations of specifying a partition type.



      Secondly, you may have errors on the drive and/or the partition table may be damaged. This happened to me when using dd to erase the first MB of a USB on /dev/sdd and I accidentally used /dev/sdb. This wiped out the first 1 MB of my second hard disk containing the MBR (Master Boot Record) and partition table.



      TestDisk can be downloaded here and has versions for Windows and Linux. It goes through every byte of your hard drive to analyze what partition type it is and rebuilds the partition tables. I used TestDisk to successfully recover all my data.



      From the website, TestDisk can:




      • Fix partition table, recover deleted partition

      • Recover FAT32 boot sector from its backup

      • Rebuild FAT12/FAT16/FAT32 boot sector

      • Fix FAT tables

      • Rebuild NTFS boot sector

      • Recover NTFS boot sector from its backup

      • Fix MFT using MFT mirror

      • Locate ext2/ext3/ext4 Backup SuperBlock

      • Undelete files from FAT, exFAT, NTFS and ext2 filesystem

      • Copy files from deleted FAT, exFAT, NTFS and ext2/ext3/ext4 partitions.






      share|improve this answer




























        1












        1








        1







        Firstly, an easier way of mounting is to use:



        mount -t auto /dev/sdb /media/usb-drive


        This way you are spared the magical incantations of specifying a partition type.



        Secondly, you may have errors on the drive and/or the partition table may be damaged. This happened to me when using dd to erase the first MB of a USB on /dev/sdd and I accidentally used /dev/sdb. This wiped out the first 1 MB of my second hard disk containing the MBR (Master Boot Record) and partition table.



        TestDisk can be downloaded here and has versions for Windows and Linux. It goes through every byte of your hard drive to analyze what partition type it is and rebuilds the partition tables. I used TestDisk to successfully recover all my data.



        From the website, TestDisk can:




        • Fix partition table, recover deleted partition

        • Recover FAT32 boot sector from its backup

        • Rebuild FAT12/FAT16/FAT32 boot sector

        • Fix FAT tables

        • Rebuild NTFS boot sector

        • Recover NTFS boot sector from its backup

        • Fix MFT using MFT mirror

        • Locate ext2/ext3/ext4 Backup SuperBlock

        • Undelete files from FAT, exFAT, NTFS and ext2 filesystem

        • Copy files from deleted FAT, exFAT, NTFS and ext2/ext3/ext4 partitions.






        share|improve this answer















        Firstly, an easier way of mounting is to use:



        mount -t auto /dev/sdb /media/usb-drive


        This way you are spared the magical incantations of specifying a partition type.



        Secondly, you may have errors on the drive and/or the partition table may be damaged. This happened to me when using dd to erase the first MB of a USB on /dev/sdd and I accidentally used /dev/sdb. This wiped out the first 1 MB of my second hard disk containing the MBR (Master Boot Record) and partition table.



        TestDisk can be downloaded here and has versions for Windows and Linux. It goes through every byte of your hard drive to analyze what partition type it is and rebuilds the partition tables. I used TestDisk to successfully recover all my data.



        From the website, TestDisk can:




        • Fix partition table, recover deleted partition

        • Recover FAT32 boot sector from its backup

        • Rebuild FAT12/FAT16/FAT32 boot sector

        • Fix FAT tables

        • Rebuild NTFS boot sector

        • Recover NTFS boot sector from its backup

        • Fix MFT using MFT mirror

        • Locate ext2/ext3/ext4 Backup SuperBlock

        • Undelete files from FAT, exFAT, NTFS and ext2 filesystem

        • Copy files from deleted FAT, exFAT, NTFS and ext2/ext3/ext4 partitions.







        share|improve this answer














        share|improve this answer



        share|improve this answer








        edited 2 days ago

























        answered 2 days ago









        WinEunuuchs2UnixWinEunuuchs2Unix

        47.7k1192185




        47.7k1192185






























            draft saved

            draft discarded




















































            Thanks for contributing an answer to Ask Ubuntu!


            • Please be sure to answer the question. Provide details and share your research!

            But avoid



            • Asking for help, clarification, or responding to other answers.

            • Making statements based on opinion; back them up with references or personal experience.


            To learn more, see our tips on writing great answers.




            draft saved


            draft discarded














            StackExchange.ready(
            function () {
            StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1125158%2fcannot-mount-usb-hard-drive%23new-answer', 'question_page');
            }
            );

            Post as a guest















            Required, but never shown





















































            Required, but never shown














            Required, but never shown












            Required, but never shown







            Required, but never shown

































            Required, but never shown














            Required, but never shown












            Required, but never shown







            Required, but never shown







            Popular posts from this blog

            GameSpot

            日野市

            Tu-95轟炸機