raspberry pi change directory (cd) command not working with USB drive












5















When navigating the file system of my USB drive in the terminal, some weird things happen that didn't use to happen on my Raspberry Pi B+. I'm not quite sure how to articulate this, so I'll just show what is




  1. I open the command line and navigate to my USB drive with cd /media/pi/MYUSB/


  2. I use cd to enter a folder of the USB drive with cd /myFolder/myOtherFolder


  3. I navigate backwards to myFolder with cd ..


  4. I try to navigate again to myOtherFolder with cd /myOtherFolder. However, this raises the bash error bash: cd: /myOtherFolder: no such file or directory



I have no idea what or why this is happening, but I used to be able to do this without the error message. Sometimes I have power outages that cause the Pi to shut off with the USB drive in it, so I have "ghost USB drives" like the ones described at the following link: Ghost USB drives left behind when power is cycled off and on



Thanks!









share







New contributor




Henry Westfall is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.

























    5















    When navigating the file system of my USB drive in the terminal, some weird things happen that didn't use to happen on my Raspberry Pi B+. I'm not quite sure how to articulate this, so I'll just show what is




    1. I open the command line and navigate to my USB drive with cd /media/pi/MYUSB/


    2. I use cd to enter a folder of the USB drive with cd /myFolder/myOtherFolder


    3. I navigate backwards to myFolder with cd ..


    4. I try to navigate again to myOtherFolder with cd /myOtherFolder. However, this raises the bash error bash: cd: /myOtherFolder: no such file or directory



    I have no idea what or why this is happening, but I used to be able to do this without the error message. Sometimes I have power outages that cause the Pi to shut off with the USB drive in it, so I have "ghost USB drives" like the ones described at the following link: Ghost USB drives left behind when power is cycled off and on



    Thanks!









    share







    New contributor




    Henry Westfall is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
    Check out our Code of Conduct.























      5












      5








      5








      When navigating the file system of my USB drive in the terminal, some weird things happen that didn't use to happen on my Raspberry Pi B+. I'm not quite sure how to articulate this, so I'll just show what is




      1. I open the command line and navigate to my USB drive with cd /media/pi/MYUSB/


      2. I use cd to enter a folder of the USB drive with cd /myFolder/myOtherFolder


      3. I navigate backwards to myFolder with cd ..


      4. I try to navigate again to myOtherFolder with cd /myOtherFolder. However, this raises the bash error bash: cd: /myOtherFolder: no such file or directory



      I have no idea what or why this is happening, but I used to be able to do this without the error message. Sometimes I have power outages that cause the Pi to shut off with the USB drive in it, so I have "ghost USB drives" like the ones described at the following link: Ghost USB drives left behind when power is cycled off and on



      Thanks!









      share







      New contributor




      Henry Westfall is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.












      When navigating the file system of my USB drive in the terminal, some weird things happen that didn't use to happen on my Raspberry Pi B+. I'm not quite sure how to articulate this, so I'll just show what is




      1. I open the command line and navigate to my USB drive with cd /media/pi/MYUSB/


      2. I use cd to enter a folder of the USB drive with cd /myFolder/myOtherFolder


      3. I navigate backwards to myFolder with cd ..


      4. I try to navigate again to myOtherFolder with cd /myOtherFolder. However, this raises the bash error bash: cd: /myOtherFolder: no such file or directory



      I have no idea what or why this is happening, but I used to be able to do this without the error message. Sometimes I have power outages that cause the Pi to shut off with the USB drive in it, so I have "ghost USB drives" like the ones described at the following link: Ghost USB drives left behind when power is cycled off and on



      Thanks!







      usb





      share







      New contributor




      Henry Westfall is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.










      share







      New contributor




      Henry Westfall is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.








      share



      share






      New contributor




      Henry Westfall is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.









      asked 10 hours ago









      Henry WestfallHenry Westfall

      283




      283




      New contributor




      Henry Westfall is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.





      New contributor





      Henry Westfall is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.






      Henry Westfall is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.






















          2 Answers
          2






          active

          oldest

          votes


















          16














          You put a leading / to your path names! That's the root directory, meaning what you write next is an absolute path.
          Your /myFolder/myOtherFolder is not on your USB if it's mounted inside /media/pi/MYUSB/ anyway.



          But you can use cd myOtherFolder in the case you're asking. I suggest reading some basic tutorial about Linux's (or Unix) file handling, filesystems, and such.






          share|improve this answer








          New contributor




          Nyos is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
          Check out our Code of Conduct.




























            1














            To go into a bit more detail —



            Whether you come from a Windows or Mac OSX background, you will be used to external drives being independent places from your hard disk (more or less).



            Part of UNIX tradition is "avoid special cases wherever possible". For instance in UNIX (and GNU/Linux), a keyboard is represented as a file that can be opened and read from just like a text file. So is a serial port (which can be written to as well). On a Raspberry PI even the GPIO pins can be controlled like this. There is a file called /dev/zero that produces a sequence of 0-bytes when you read it. etc.



            This was a brilliant idea as it allowed programs to be constructed without having all sorts of special cases.



            Anyway, in a similar tradition, there is one directory structure for the entire system, starting at / (the root directory). No special cases, no "drive letters". Just /.



            Drives can be "attached" somewhere in this structure using the mount command (an RPi is configured to do this automatically but you can also do it manually).



            Every file's path descends from / in some way (for example /home/pi/test.txt). Because of this, a path starting with / is assumed to be an "absolute" path, starting from the root directory of the entire system. Without the / at the start, it is considered a "relative" path, i.e. it starts from the current directory.



            Two other tricks—you probably know that a path starting with .. refers to the parent directory. A path starting with ~ starts from your home directory, e.g. ~/test.txt works the same no matter what your current directory is.





            share








            New contributor




            Artelius is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
            Check out our Code of Conduct.




















              Your Answer






              StackExchange.ifUsing("editor", function () {
              return StackExchange.using("schematics", function () {
              StackExchange.schematics.init();
              });
              }, "cicuitlab");

              StackExchange.ready(function() {
              var channelOptions = {
              tags: "".split(" "),
              id: "447"
              };
              initTagRenderer("".split(" "), "".split(" "), channelOptions);

              StackExchange.using("externalEditor", function() {
              // Have to fire editor after snippets, if snippets enabled
              if (StackExchange.settings.snippets.snippetsEnabled) {
              StackExchange.using("snippets", function() {
              createEditor();
              });
              }
              else {
              createEditor();
              }
              });

              function createEditor() {
              StackExchange.prepareEditor({
              heartbeatType: 'answer',
              autoActivateHeartbeat: false,
              convertImagesToLinks: false,
              noModals: true,
              showLowRepImageUploadWarning: true,
              reputationToPostImages: null,
              bindNavPrevention: true,
              postfix: "",
              imageUploader: {
              brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
              contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
              allowUrls: true
              },
              onDemand: true,
              discardSelector: ".discard-answer"
              ,immediatelyShowMarkdownHelp:true
              });


              }
              });






              Henry Westfall is a new contributor. Be nice, and check out our Code of Conduct.










              draft saved

              draft discarded


















              StackExchange.ready(
              function () {
              StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fraspberrypi.stackexchange.com%2fquestions%2f94877%2fraspberry-pi-change-directory-cd-command-not-working-with-usb-drive%23new-answer', 'question_page');
              }
              );

              Post as a guest















              Required, but never shown

























              2 Answers
              2






              active

              oldest

              votes








              2 Answers
              2






              active

              oldest

              votes









              active

              oldest

              votes






              active

              oldest

              votes









              16














              You put a leading / to your path names! That's the root directory, meaning what you write next is an absolute path.
              Your /myFolder/myOtherFolder is not on your USB if it's mounted inside /media/pi/MYUSB/ anyway.



              But you can use cd myOtherFolder in the case you're asking. I suggest reading some basic tutorial about Linux's (or Unix) file handling, filesystems, and such.






              share|improve this answer








              New contributor




              Nyos is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
              Check out our Code of Conduct.

























                16














                You put a leading / to your path names! That's the root directory, meaning what you write next is an absolute path.
                Your /myFolder/myOtherFolder is not on your USB if it's mounted inside /media/pi/MYUSB/ anyway.



                But you can use cd myOtherFolder in the case you're asking. I suggest reading some basic tutorial about Linux's (or Unix) file handling, filesystems, and such.






                share|improve this answer








                New contributor




                Nyos is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
                Check out our Code of Conduct.























                  16












                  16








                  16







                  You put a leading / to your path names! That's the root directory, meaning what you write next is an absolute path.
                  Your /myFolder/myOtherFolder is not on your USB if it's mounted inside /media/pi/MYUSB/ anyway.



                  But you can use cd myOtherFolder in the case you're asking. I suggest reading some basic tutorial about Linux's (or Unix) file handling, filesystems, and such.






                  share|improve this answer








                  New contributor




                  Nyos is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
                  Check out our Code of Conduct.










                  You put a leading / to your path names! That's the root directory, meaning what you write next is an absolute path.
                  Your /myFolder/myOtherFolder is not on your USB if it's mounted inside /media/pi/MYUSB/ anyway.



                  But you can use cd myOtherFolder in the case you're asking. I suggest reading some basic tutorial about Linux's (or Unix) file handling, filesystems, and such.







                  share|improve this answer








                  New contributor




                  Nyos is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
                  Check out our Code of Conduct.









                  share|improve this answer



                  share|improve this answer






                  New contributor




                  Nyos is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
                  Check out our Code of Conduct.









                  answered 10 hours ago









                  NyosNyos

                  19114




                  19114




                  New contributor




                  Nyos is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
                  Check out our Code of Conduct.





                  New contributor





                  Nyos is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
                  Check out our Code of Conduct.






                  Nyos is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
                  Check out our Code of Conduct.

























                      1














                      To go into a bit more detail —



                      Whether you come from a Windows or Mac OSX background, you will be used to external drives being independent places from your hard disk (more or less).



                      Part of UNIX tradition is "avoid special cases wherever possible". For instance in UNIX (and GNU/Linux), a keyboard is represented as a file that can be opened and read from just like a text file. So is a serial port (which can be written to as well). On a Raspberry PI even the GPIO pins can be controlled like this. There is a file called /dev/zero that produces a sequence of 0-bytes when you read it. etc.



                      This was a brilliant idea as it allowed programs to be constructed without having all sorts of special cases.



                      Anyway, in a similar tradition, there is one directory structure for the entire system, starting at / (the root directory). No special cases, no "drive letters". Just /.



                      Drives can be "attached" somewhere in this structure using the mount command (an RPi is configured to do this automatically but you can also do it manually).



                      Every file's path descends from / in some way (for example /home/pi/test.txt). Because of this, a path starting with / is assumed to be an "absolute" path, starting from the root directory of the entire system. Without the / at the start, it is considered a "relative" path, i.e. it starts from the current directory.



                      Two other tricks—you probably know that a path starting with .. refers to the parent directory. A path starting with ~ starts from your home directory, e.g. ~/test.txt works the same no matter what your current directory is.





                      share








                      New contributor




                      Artelius is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
                      Check out our Code of Conduct.

























                        1














                        To go into a bit more detail —



                        Whether you come from a Windows or Mac OSX background, you will be used to external drives being independent places from your hard disk (more or less).



                        Part of UNIX tradition is "avoid special cases wherever possible". For instance in UNIX (and GNU/Linux), a keyboard is represented as a file that can be opened and read from just like a text file. So is a serial port (which can be written to as well). On a Raspberry PI even the GPIO pins can be controlled like this. There is a file called /dev/zero that produces a sequence of 0-bytes when you read it. etc.



                        This was a brilliant idea as it allowed programs to be constructed without having all sorts of special cases.



                        Anyway, in a similar tradition, there is one directory structure for the entire system, starting at / (the root directory). No special cases, no "drive letters". Just /.



                        Drives can be "attached" somewhere in this structure using the mount command (an RPi is configured to do this automatically but you can also do it manually).



                        Every file's path descends from / in some way (for example /home/pi/test.txt). Because of this, a path starting with / is assumed to be an "absolute" path, starting from the root directory of the entire system. Without the / at the start, it is considered a "relative" path, i.e. it starts from the current directory.



                        Two other tricks—you probably know that a path starting with .. refers to the parent directory. A path starting with ~ starts from your home directory, e.g. ~/test.txt works the same no matter what your current directory is.





                        share








                        New contributor




                        Artelius is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
                        Check out our Code of Conduct.























                          1












                          1








                          1







                          To go into a bit more detail —



                          Whether you come from a Windows or Mac OSX background, you will be used to external drives being independent places from your hard disk (more or less).



                          Part of UNIX tradition is "avoid special cases wherever possible". For instance in UNIX (and GNU/Linux), a keyboard is represented as a file that can be opened and read from just like a text file. So is a serial port (which can be written to as well). On a Raspberry PI even the GPIO pins can be controlled like this. There is a file called /dev/zero that produces a sequence of 0-bytes when you read it. etc.



                          This was a brilliant idea as it allowed programs to be constructed without having all sorts of special cases.



                          Anyway, in a similar tradition, there is one directory structure for the entire system, starting at / (the root directory). No special cases, no "drive letters". Just /.



                          Drives can be "attached" somewhere in this structure using the mount command (an RPi is configured to do this automatically but you can also do it manually).



                          Every file's path descends from / in some way (for example /home/pi/test.txt). Because of this, a path starting with / is assumed to be an "absolute" path, starting from the root directory of the entire system. Without the / at the start, it is considered a "relative" path, i.e. it starts from the current directory.



                          Two other tricks—you probably know that a path starting with .. refers to the parent directory. A path starting with ~ starts from your home directory, e.g. ~/test.txt works the same no matter what your current directory is.





                          share








                          New contributor




                          Artelius is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
                          Check out our Code of Conduct.










                          To go into a bit more detail —



                          Whether you come from a Windows or Mac OSX background, you will be used to external drives being independent places from your hard disk (more or less).



                          Part of UNIX tradition is "avoid special cases wherever possible". For instance in UNIX (and GNU/Linux), a keyboard is represented as a file that can be opened and read from just like a text file. So is a serial port (which can be written to as well). On a Raspberry PI even the GPIO pins can be controlled like this. There is a file called /dev/zero that produces a sequence of 0-bytes when you read it. etc.



                          This was a brilliant idea as it allowed programs to be constructed without having all sorts of special cases.



                          Anyway, in a similar tradition, there is one directory structure for the entire system, starting at / (the root directory). No special cases, no "drive letters". Just /.



                          Drives can be "attached" somewhere in this structure using the mount command (an RPi is configured to do this automatically but you can also do it manually).



                          Every file's path descends from / in some way (for example /home/pi/test.txt). Because of this, a path starting with / is assumed to be an "absolute" path, starting from the root directory of the entire system. Without the / at the start, it is considered a "relative" path, i.e. it starts from the current directory.



                          Two other tricks—you probably know that a path starting with .. refers to the parent directory. A path starting with ~ starts from your home directory, e.g. ~/test.txt works the same no matter what your current directory is.






                          share








                          New contributor




                          Artelius is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
                          Check out our Code of Conduct.








                          share


                          share






                          New contributor




                          Artelius is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
                          Check out our Code of Conduct.









                          answered 4 hours ago









                          ArteliusArtelius

                          1111




                          1111




                          New contributor




                          Artelius is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
                          Check out our Code of Conduct.





                          New contributor





                          Artelius is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
                          Check out our Code of Conduct.






                          Artelius is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
                          Check out our Code of Conduct.






















                              Henry Westfall is a new contributor. Be nice, and check out our Code of Conduct.










                              draft saved

                              draft discarded


















                              Henry Westfall is a new contributor. Be nice, and check out our Code of Conduct.













                              Henry Westfall is a new contributor. Be nice, and check out our Code of Conduct.












                              Henry Westfall is a new contributor. Be nice, and check out our Code of Conduct.
















                              Thanks for contributing an answer to Raspberry Pi Stack Exchange!


                              • Please be sure to answer the question. Provide details and share your research!

                              But avoid



                              • Asking for help, clarification, or responding to other answers.

                              • Making statements based on opinion; back them up with references or personal experience.


                              To learn more, see our tips on writing great answers.




                              draft saved


                              draft discarded














                              StackExchange.ready(
                              function () {
                              StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fraspberrypi.stackexchange.com%2fquestions%2f94877%2fraspberry-pi-change-directory-cd-command-not-working-with-usb-drive%23new-answer', 'question_page');
                              }
                              );

                              Post as a guest















                              Required, but never shown





















































                              Required, but never shown














                              Required, but never shown












                              Required, but never shown







                              Required, but never shown

































                              Required, but never shown














                              Required, but never shown












                              Required, but never shown







                              Required, but never shown







                              Popular posts from this blog

                              GameSpot

                              connect to host localhost port 22: Connection refused

                              Getting a Wifi WPA2 wifi connection